NordicTrack E 11.5 Elliptical Uk Manual - Page 9

6. Identify the Right Pedal (14), the Right Pedal Insert (117), and the Right Pedal Arm (12) and 6 orient them as shown. Attach the Right Pedal (14) and the Right Pedal Insert (117) to the Right Pedal Plate (80) with four M6 x 12mm Screws (146). Tip: It may be helpful to lift the Right Pedal Plate. Attach the Left Pedal (not shown) and the Left Pedal Insert (not shown) to the Left Pedal Plate (not shown) in the same way. 14 117 80 12 146 7. Apply grease to the axle on the right Crank Arm (39). 7 Orient a Pedal Arm Sleeve (46) so that the flat side is facing the elliptical. Slide the Pedal Arm Sleeve onto the axle on the right Crank Arm (39). Attach the Pedal Arm Sleeve (46) with an M8 x 25mm Screw (121), a Large Axle Cover (113), and an M8 Washer (95). Tip: Avoid damaging the Large Axle Cover when tightening the Screw. Repeat this step on the other side of the elliptical. Grease 39 46 95 Flat Side 113 121 9