NordicTrack E 600 Elliptical Uk Manual - Page 10

9. Attach the Right Pedal Arm (49) to the right Crank Arm (25) with an M8 x 20mm Screw (62), 9 an M8 Split Washer (64), an M8 Large Washer (65), and a Pedal Arm Spacer (34). Then, attach a Pedal Arm Cover (30) to the Right Pedal Arm (49) with an M5 x 8mm Screw (84). 14 Repeat this step for the Left Pedal Arm (14). 25 10. Slide a Small Wave Washer (88) onto an M8 x 86mm Bolt (81). 10 While a second person holds the front end of the Right Pedal Arm (49) inside the bracket on the right Upper Body Leg (6), insert the M8 x 86mm Bolt (81) through both parts. Then, tighten an M8 Locknut (80) with an M8 Washer (82) onto the M8 x 86mm Bolt (81). Repeat this step to attach the Left Pedal Arm (14) to the left Upper Body Leg (6). See assembly step 5. Tighten the six M8 x 20mm Screws (62). Then, press the Front Shield Cover (37) into place. See assembly step 7. Tighten the two M8 x 20mm Screws (62). 49 34 65 64 62 30 84 6 14 37 80 82 6 88 81 49 10