NordicTrack E 600 Elliptical Uk Manual - Page 9

7. Slide a Medium Wave Washer (68) (only one is shown) onto each side of the axle on the 7 Upright (2). Next, slide the Left and Right Upper Body Arms (8, 9) onto the left and right sides of the Upright (2). 8 Attach the Right Upper Body Arm (9) with an M8 x 20mm Screw (62), an M8 Split Washer (64), and an M8 Large Washer (65); do not fully tighten the Screw yet. Attach the Left Upper Body Arm (8) in the same way. 2 68 9 65 64 62 8. Identify the Right Pedal (13) and the Right Pedal Arm (49), and orient them as shown. 8 Attach the Right Pedal (13) to the Right Pedal Arm (49) with three M8 x 45mm Screws (83), three M8 Split Washers (64), and three M8 Washers (82); start all the Screws, and then tighten them. Attach the Left Pedal (12) to the Left Pedal Arm (14) in the same way. 12 14 13 49 82 64 83 9