NordicTrack E 7.5 I Elliptical English Manual - Page 27
See Exploded Drawing C
View all NordicTrack E 7.5 I Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
HOW TO ADJUST THE DRIVE BELT If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, first unplug the power adapter. Next, use a standard screwdriver to 118 remove the Shield Cover (75) and 75 the Shield Cover Cap (118). See EXPLODED DRAWING C on page 35. Identify the Left and Right Shields (73, 74). Remove the M4 x 19mm Screws (5) and the M4 x 45mm Screw (107) from the Left and Right Shields. Then, remove the Right Shield. Next, locate and loosen the Idler Screw (89). Tighten the Belt Adjustment Screw (91) until the Drive Belt (113) is tight. Then, retighten the Idler Screw. 113 See assembly step 15 on page 14. Remove the Right Leg Outer and Inner Covers (69, 83). See assembly step 12 on page 12. Remove the Right Pedal Arm (58) from the Right Upper Body Leg (60). Next, remove the M8 x 16mm Screw (95), the Large Axle Cover (53), and the M8 Washer (not shown) from the right Crank Arm (20). Then, carefully remove the Right Roller Arm (59) and the Right Pedal Arm (58) from the elliptical. 89 91 Reattach the parts that you removed. Then, plug in the power adapter. 95 53 20 59 58 27