NordicTrack E 7.7 Elliptical English Manual - Page 10

Tip: To prevent the Upper Wire 110

Page 10 highlights

5. Tip: Avoid pinching the wires. Avoid damaging the indicated plastic tabs. Set the Upright 5 (4) on the Frame (1). Attach the Upright (4) with four M10 x 25mm Screws (99) and four M10 Split Washers (105). Avoid pinching the wires and avoid damaging the tabs 4 99 105 Tabs 99 105 1 6. See the inset drawing. Locate the wire tie in the lower end of the Upright (4). Tie the wire tie 6 to the Upper Wire (110). Then, pull the upper end of the wire tie until the Upper Wire is routed through the Upright. Tip: To prevent the Upper Wire (110) from falling into the Upright (4), secure the Upper Wire with the wire tie. Wire Tie 4 Wire Tie 110 Wire Tie 110 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

10
6.
See the inset drawing.
Locate the wire tie in
the lower end of the Upright (4). Tie the wire tie
to the Upper Wire (110). Then, pull the upper
end of the wire tie until the Upper Wire is routed
through the Upright.
Tip: To prevent the Upper Wire (110) from
falling into the Upright (4), secure the Upper
Wire with the wire tie
.
4
110
Wire Tie
Wire Tie
Wire
Tie
110
5
5.
Tip: Avoid pinching the wires. Avoid damag-
ing the indicated plastic tabs.
Set the Upright
(4) on the Frame (1).
Attach the Upright (4) with four M10 x 25mm
Screws (99) and four M10 Split Washers (105).
Tabs
4
1
105
105
99
99
6
Avoid pinching the
wires and avoid
damaging the tabs