NordicTrack E7 Zl Uk Manual - Page 19

 Pulse-This display will show your heart rate when you use the handgrip heart rate monitor or the optional chest heart rate monitor (see step 5).  Resistance-This display will show the resistance level of the pedals for a few seconds each time the resistance level changes.  Profile-When a workout is selected, this display will show a profile of the resistance settings for the workout. When your pulse is detected, your heart rate will be shown in the display. For the most accurate heart rate reading, hold the contacts for at least 15 seconds. If your heart rate is not shown, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the contacts tightly. For optimal performance, clean the contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. Change the volume level of the console by pressing the Volume increase and decrease buttons. 6. When you are finished exercising, the console will turn off automatically. 5. Measure your heart rate if desired. You can measure you heart rate using either the handgrip heart rate monitor or the optional chest heart rate monitor (see page 24 for information about the optional chest heart rate monitor). If the pedals do not move for several seconds, a tone will sound and the console will pause. If the pedals do not move for several minutes and the buttons are not pressed, the console will turn off and the display will be reset. Note: If you hold the handgrip heart rate monitor and wear the heart rate monitor at the same time, the console will not display your heart rate accurately. If there are sheets of plastic on the metal contacts Contacts on the handgrip heart rate moni- tor, remove the plastic. In addi- tion, make sure that your hands are clean. To measure your heart rate, hold the handgrip heart rate monitor with your palms resting against the contacts. Avoid moving your hands or gripping the contacts tightly. 19