NordicTrack Elite 12.5 Elliptical Uk Manual - Page 22
How To Change Console Settings
View all NordicTrack Elite 12.5 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HOW TO CHANGE CONSOLE SETTINGS 1. Select the settings mode. To select the settings mode, press the Settings button. The display will show the total number of hours that the elliptical has been used and the total distance (in miles or kilometers) that has been pedaled on the elliptical. If an iFit module is connected to the console, the display will show the words WIFI MODULE or USB MODULE. If no module is connected, the display will show the words NO IFIT MODULE. If no module is connected, some of the settings options will not be available. 2. Navigate the settings mode. While the settings mode is selected, the matrix of the display will display several optional screens. Press the increase and decrease buttons next to the Enter button repeatedly to select the desired optional screen. The lower section of the display will show instructions for the selected optional screen. Make sure to follow the instructions shown in the lower part of the display. 3. Change settings as desired. Demo-The console features a display demo mode, designed to be used if the elliptical is displayed in a store. Press the Enter button repeatedly to turn the demo mode ON or OFF. Units-The currently selected unit of measurement will appear in the display. To change the unit of measurement, press the Enter button repeatedly. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. Contrast Level-The currently selected contrast level will appear in the display. Press the Power Ramp increase and decrease buttons to adjust the contrast level. The following additional settings will be available if an iFit module is inserted into the console. Trainer Voice-The currently selected setting for the audio coach will appear in the display. Press the Enter button repeatedly to turn the audio coach ON or OFF. Default Menu-The default menu will appear when you press the Home button. Press the Enter button repeatedly to select the manual mode or the iFit menu as the default menu. Check Status-The words CHECK WIFI STATUS or CHECK USB STATUS will appear in the display. Press the Enter button. After a few seconds, the status of the iFit module will appear in the display. To exit this display, press the Settings button. S end/Receive-The words SEND/RECEIVE DATA will appear in the display. Press the Enter button. The console will then check for iFit workouts and firmware downloads. 4. Exit the settings mode. Press the Settings button to exit the settings mode. 22