NordicTrack Elite 4200 Treadmill English Manual - Page 7

Assembly

Get NordicTrack Elite 4200 Treadmill PDF manuals and user guides View all NordicTrack Elite 4200 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

xtension Leg Nut (106)-4 ASSEMBLY 4 1/2" Bolt (78)-4 Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not Was dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a3s/4m"aTlel kamSocruenwt o(5f 8lu)b-r4icant may be transferred to the top of the walking belt or the ship1p/2in"gScilavertroSn.cTrehwis is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the w(a4l8k)in-g1 belt, simply wipe off the lubricant with a soft cloth and a mild, crew (123)-2non-abrasive cleaner. Spacer Screw (60)-2 Assembly requires the included hex key and your own Phillips screwdriver . Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware may be included. Star Washer (90)-10 3/4" Screw (4)-4 5/16 3/8 Handrail Bolt (64)-6 Upright Bolt (72)-4 1. Make sure that the power cord is unplugged. 1 With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (83) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving forward or backward until assembly step 2 is completed. Upper Latch Bolt (XX)-1 Lower Latch Bolt (XX)-1 Nut (38)-2 7 Console Bolt (72)-4 83 Cardboard Stand

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
7
ASSEMBLY
Assembly requires two persons.
Set the treadmill in a cleared area and remove all packing materials.
Do not
dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires the included hex key
and your own Phillips screwdriver
.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly.
Note: If a part is not in the parts bag, check to see if it is preattached to
one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly.
Extra hardware may be included.
Star Washer
(90)–10
Upright Bolt (72)–4
3/4" Screw (4)–4
Handrail Bolt (64)–6
1.
Make sure that the power cord is unplugged.
With the help of a second person, raise the front
of the treadmill and insert the crossbar on the
Base (83) into the cutout in the cardboard stand
as shown.
Have the second person hold the
treadmill to prevent it from moving forward
or backward until assembly step 2 is com-
pleted.
83
Cardboard
Stand
1