NordicTrack Gx 2.5 Bike English Manual - Page 22
Maintenance And Troubleshooting
View all NordicTrack Gx 2.5 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise bike regularly. Replace any worn parts immediately. To clean the exercise bike, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. CONSOLE TROUBLESHOOTING If lines appear in the console display, see step 4 on page 20 and adjust the contrast level of the display. If the console does not display your heart rate when you use the handgrip heart rate monitor, see step 5 on page 15. HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first unplug the power adapter. Then, remove the left pedal and the left pedal disc (see the instructions below). Using an adjustable wrench, turn the left pedal clockwise and remove it. Rotate the left Pedal Disc (17) clockwise to release it from the Left Shield (11). Then, carefully work the left Pedal Disc off the Left Crank Arm (20). 20 11 17 Locate the Reed Switch (57). Loosen, but do not remove, the two M4 x 13mm Flange Screws (63). 55 57 20 63 Next, rotate the Left Crank Arm (20) until a Magnet (55) is aligned with the Reed Switch (57). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 13mm Flange Screws (63). Plug in the power adapter and rotate the Left Crank Arm (20) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the left pedal disc and the left pedal. 22