NordicTrack Gx 4.4 Pro Bike English Manual - Page 9
Attach the Rear Stabilizer 3 to the Frame 1
 |
View all NordicTrack Gx 4.4 Pro Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3. Attach the Rear Stabilizer (3) to the Frame (1) with two M10 x 110mm Screws (53). 3 3 53 4. Orient the Upright (4) and the Shield Cover (7) as shown. Slide the Shield Cover upward onto 4 the Upright. Have a second person hold the Upright (4) and the Shield Cover (7) near the front of the Frame (1). Locate the wire tie inside the Upright (4). Tie the lower end of the wire tie to the Main Wire (58). Pull the other end of the wire tie upward until the Main Wire (58) is routed through the Upright (4). 1 4 7 Wire Tie 58 1 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
9
3.
Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 110mm Screws (53).
53
1
3
3
4.
Orient the Upright (4) and the Shield Cover (7)
as shown. Slide the Shield Cover upward onto
the Upright.
Have a second person hold the Upright (4)
and the Shield Cover (7) near the front of the
Frame (1).
Locate the wire tie inside the Upright (4). Tie the
lower end of the wire tie to the Main Wire (58).
Pull the other end of the wire tie upward until the
Main Wire (58) is routed through the Upright (4).
4
4
7
58
1
Wire Tie