NordicTrack Gx 5.1 English Manual - Page 5
Assembly
View all NordicTrack Gx 5.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires an adjustable wrench screwdriver . and a Phillips Note: If a part is not in the hardware kit, check to see if it has been preattached. 1. Remove the two screws, the two washers, and the shipping bracket (not shown) from the rear of 1 the Frame (1) if necessary. Discard the screws, washers, and shipping bracket. Identify the Rear Stabilizer (58), which does not have wheels. Attach the Rear Stabilizer (58) to the Frame (1) with two M8 x 16mm Screws (55) and two M8 Washers (54). 55 54 1 58 2. Remove the two screws, the two washers, and the shipping bracket (not shown) from the 2 front of the Frame (1) if necessary. Discard the screws, washers, and shipping bracket. Attach the Front Stabilizer (49) to the Frame (1) with two M8 x 16mm Screws (55) and two M8 Washers (54). 55 54 1 49 5