NordicTrack Gx 5.1 English Manual - Page 7
Attach the Water Bottle Holder 6 to the Frame
View all NordicTrack Gx 5.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
6. Orient the Seat Post (27) as shown. 6 Locate the Adjustment Knob (3) on the rear of the Frame (1). Loosen the Adjustment Knob and pull it outward. Then, insert the Seat Post (27) into the Frame. Move the Seat Post (27) upward or downward to the desired position, release the Adjustment Knob (3) into an adjustment hole in the Seat Post, and then tighten the Adjustment Knob. Make sure that the Adjustment Knob is firmly engaged in an adjustment hole. 27 3 1 7. Orient the Seat (29) and the Seat Carriage (28) as shown. 7 Attach the Seat (29) to the Seat Carriage (28) with two M8 Hex Nuts (24). Make sure that the nose of the Seat is pointing straight ahead before you tighten the Hex Nuts. 24 29 24 Note: The M8 Hex Nuts (24) may be preattached to the clamp on the Seat (29). Locate the Adjustment Knob (3) on the Seat Post (27). Loosen the Adjustment Knob and pull it outward. Then, insert the Seat Carriage (28) into the Seat Post. Slide the Seat Carriage (28) to the desired position and then release the Adjustment Knob (3) into one of the adjustment holes in the Seat Carriage. Make sure that the Adjustment Knob is firmly engaged in an adjustment hole. 28 27 3 8. Attach the Water Bottle Holder (6) to the Frame (1) with two M5 x 12mm Socket Screws (7). 8 1 76 7