NordicTrack T 12.0 Instruction Manual - Page 10
Upright Wire 80.
View all NordicTrack T 12.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. Remove and save the four indicated 5/16" x 3/4" Screws (13). 6 Identify the Left and Right Base Covers (86, 85). Slide the Left Base Cover onto the Left Upright (78), and slide the Right Base Cover onto the Right Upright (79). Do not press the Base Covers into place yet. 13 78 86 13 79 85 7. Attach a Handrail (72) to the Right Upright (79) with two 5/16" x 2" Screws (5) and two 5/16" 7 5 Star Washers (7); start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (80). 7 Then, remove and discard the two indicated screws (E). E 72 Attach the other Handrail (not shown) to the Left Upright (78) in the same way. Note: There are no wires on the left side. 78 80 79 8. Carefully slide the Upright Crossbar (77) between the Left and Right Uprights (78, 79). 8 Attach the Upright Crossbar with the four 5/16" x 3/4" Screws (13) that you removed in step 6 and four 5/16" Star Washers (7); start all four Screws, and then tighten them. 7 13 77 13 7 79 78 10