NordicTrack T9 Uk Manual - Page 7
See the inset drawing., Do not overtighten the Nut; the Wheel must, turn freely., do not fully fold
View all NordicTrack T9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (57) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Cut the shipping ties securing the Upright Wire (97) to the Base (95). Locate a tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach a Base Foot (93) to the Base (95) in the location shown with a #8 x 1" Tek Screw (4) and a Base Foot Spacer (11). Then, attach another Base Foot (93) with only a #8 x 1" Tek Screw (4). 2 B 97 95 11 57 93 4 3. Attach a Wheel (96) with the 3/8" Nut (9) and the 3/8" x 2" Bolt (5) that you removed in step 1. 3 Do not overtighten the Nut; the Wheel must turn freely. 95 5 96 9 A Hole 93 4 4. Identify the Right Upright (86) and the Right 4 Upright Spacer (92), which are marked with "Right" stickers. Insert the Upright Wire (97) 97 86 through the Right Upright Spacer as shown. Set the Right Upright Spacer on the Base (95). Have a second person hold the Right Upright (86) near the Base (95). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Upright Wire (97). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. Wire Tie 97 7 86 Wire Tie 97 92 95