NordicTrack T9 Uk Manual - Page 8

5. Press a Base Cap (88) into the Base (95). Hold a Bolt Spacer (25) inside the lower end of the Right Upright (86). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (10) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (25), 3/8" x 4" Bolt (6), and 3/8" Star Washer (10). Then, set the Right Upright into the Right Upright Spacer (92). Partially tighten the 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet. 5 86 95 6 92 10 25 88 97 25 6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (57) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Base Foot (93) to the Base (95) in the location shown with a #8 x 1" Tek Screw (4) and a Base Foot Spacer (11). Then, attach another Base Foot (93) with only a #8 x 1" Tek Screw (4). Attach a Wheel (96) with the 3/8" Nut (9) and the 3/8" x 2" Bolt (5) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 6 93 4 A B 95 57 5 11 96 4 93 9 7. Press a Base Cap (88) into the Base (95). 7 Set the Left Upright Spacer (87) on the Base (95). Have a second person hold the Left Upright (85) near the Base. Hold a Bolt Spacer (25) inside the lower end of the Left Upright. 6 85 87 Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (10) into the Left Upright and the Bolt 88 10 Spacer. Repeat this step with a second Bolt 95 Spacer (25), 3/8" x 4" Bolt (6), and 3/8" Star Washer (10). Then, set the Left Upright into the Left Upright Spacer. 25 Finger tighten the 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet. With the help of a second person, tip the treadmill so that the Base (95) is flat on the floor. 8