NordicTrack Vxr 475 Bike Uk Manual - Page 11

12. While a second person holds the Console (15) near the Handlebar (14), plug the Main Wire (77) and the Pulse Wires (50) into the receptacles (F) on the Console. The connectors on the Main Wire (77) and the Pulse Wires (50) should slide easily into the receptacles (F) and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the Console (15) may become damaged when you use the exercise bike. 12 15 77 50 49 14 F Then, insert the excess wire into the Handlebar (14). Tip: Avoid pinching the wires. Attach the Console (15) to the Handlebar (14) with four M4 x 16mm Screws (49); start all the Screws, and then tighten them. Avoid pinching the wires 13. Slide the Console Cover (16) upward against the Handlebar (14). Attach the Console Cover with 13 two M4 x 16mm Screws (49). 49 16 14 14. Attach the Tablet Holder (17) to the Console (15) with four M4 x 12mm Machine Screws (18); start 14 all the Screws, and then tighten them. 15 17 18 11