Oki B4300 RAM Memory Expansion Options Installation Instructions - Page 1

RAM Memory Expansion Options for B4200 and B4300 Installation Instructions Oki 70042301 (16 MB) Oki 70042401 (32 MB) Caution! To avoid damage by static electricity or rough handling, keep the memory card in its packaging until you're ready to install it. Note: The printer has only one slot in which to install an optional RAM Memory card. 1. Turn off the printer, and remove the power cord and interface cable. 2. On the back of the printer, loosen the access panel screw and remove the access panel. Caution! To avoid damage to the RAM card, ground yourself (touch metal) before handling it. 4. Remove the RAM memory card from its packaging. 5. Hold the card with the gold contact edge down and the notched corner (1) aimed away from you. 7. Replace the access panel: a. Align the tabs at the bottom of the access panel with the slots in the printer. 6. Insert the card in the slot-notched corner (1) away from you-and press down firmly until it snaps into place. The blue tab (circled) will move up to the locked position. b. Swing the panel up and tighten the screw to secure it in place. 3. Locate the slot for the card: 8. Reattach the interface cord and power cable, then turn on the printer. 9. Print a MenuMap. Model B4200 a. Press and release CONTROL. The printer goes off line. b. Press and hold CONTROL for at least 2 seconds, but no more that 5 seconds. The MenuMap Prints. (continued on back) Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620 Phone: (856) 235-2600 Fax: (856) 222-5320 http://www.okidata.com http://my.okidata.com