Oki B512dn B412dn/B532dn/B512dn Safety/Warranty/Regulatory Guide - Page 8

Accidental release measures, Handling and storage, Exposure controls/personal protection, Physical

Get Oki B512dn PDF manuals and user guides View all Oki B512dn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

6. Accidental release measures PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURE : Use mask, goggles and protective gloves. Large spills : Remove person to safety. Ensure adequate ventilation. Treat from upwind position. ENVIRONMENTAL PRECAUTIONS : Do not discharge into the drains, surface waters or ground water directly. METHODS FOR CLEANING UP : Prevent dispersion of dust. Sweep or vacuum by dust-explosion-proof type cleaner. PREVENTION OF SECONDARY HAZARDS : No information available 7. Handling and storage HANDLING TECHNICAL MEASURES : PRECAUTIONS : SAFE HANDLING ADVICE : STORAGE SUITABLE STORAGE : CONDITIONS SAFE PACKAGING MATERIALS : Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Avoid inhalation of fine dust. Use an adequate ventilation. Wash thoroughly after handling. If needed, use personal protective equipment as required. Prevent generation of dust. This material may cause risk of dust explosion. Keep container tightly closed. Protect from sun. Store in a well-ventilated room (under 40 °C). No information available 8. Exposure controls/personal protection ENGINEERING MEASURES : Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use local exhaust ventilation, in case of generation of dust. LIMIT VALUES ACGIH (TLV) : TWA 3 mg/m3 (Inhalable fraction), STEL - : Carbon black 10 mg/m3 TWA (inhalable particles, recommended); 3 mg/m3 TWA (respirable particles, recommended) (Particulates (insoluble or poorly soluble) not otherwise specified (PNOS)) OSHA (PEL) : PEL TWA 3.5mg/m3, (2012 year edition) : Carbon black 15 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirable fraction) (Particulates not otherwise regulated) PERSONAL PROTECTIVE EQUIPMENT RESPIRATORY PROTECTION HAND PROTECTION EYE PROTECTION SKIN AND BODY PROTECTION HYGIENE MEASURES : Use dust mask, as appropriate to situation. : Rubber gloves. : Safety glasses with side shield(Safety goggles or Face shield). : Full-body suit. : No information available 9. Physical and chemical properties PHYSICAL STATES FORM : Powder COLOUR : Black ODOUR : Odourless SDS PAGE 3 / 6 8 - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
8 - English
6. Accidental release measures
±
7. Handling and storage
±
8. Exposure controls/personal protection
±
9. Physical and chemical properties
PERSONAL PRECAUTIONS,
PROTECTIVE EQUIPMENT AND
EMERGENCY PROCEDURE
:
Use mask, goggles and protective gloves.
Large spills : Remove person to safety.
Ensure adequate ventilation.
Treat from upwind position.
ENVIRONMENTAL PRECAUTIONS
:
Do not discharge into the drains, surface waters or ground water directly.
METHODS FOR CLEANING UP
:
Prevent dispersion of dust.
Sweep or vacuum by dust-explosion-proof type cleaner.
PREVENTION OF SECONDARY
HAZARDS
:
No information available
HANDLING
TECHNICAL MEASURES
:
Facilities storing or utilizing this material should be equipped with an eyewash facility
and a safety shower.
PRECAUTIONS
:
Avoid inhalation of fine dust.
SAFE HANDLING ADVICE
:
Use an adequate ventilation.
Wash thoroughly after handling.
If needed, use personal protective equipment as required.
Prevent generation of dust.
This material may cause risk of dust explosion.
STORAGE
SUITABLE STORAGE
CONDITIONS
:
Keep container tightly closed.
Protect from sun. Store in a well-ventilated room (under 40
°
C).
SAFE PACKAGING MATERIALS
:
No information available
ENGINEERING MEASURES
:
Facilities storing or utilizing this material should be equipped with an eyewash facility
and a safety shower.
Use local exhaust ventilation, in case of generation of dust.
LIMIT VALUES
ACGIH (TLV)
:
TWA 3 mg/m3 (Inhalable fraction), STEL - : Carbon black
10 mg/m3 TWA (inhalable particles, recommended);
3 mg/m3 TWA (respirable particles, recommended)
(Particulates (insoluble or poorly soluble) not otherwise specified (PNOS))
OSHA (PEL)
:
PEL TWA 3.5mg/m3, (2012 year edition) : Carbon black
15 mg/m3 TWA (total dust);
5 mg/m3 TWA (respirable fraction)
(Particulates not otherwise regulated)
PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY PROTECTION
:
Use dust mask, as appropriate to situation.
HAND PROTECTION
:
Rubber gloves.
EYE PROTECTION
:
Safety glasses with side shield(Safety goggles or Face shield).
SKIN AND BODY PROTECTION
:
Full-body suit.
HYGIENE MEASURES
:
No information available
PHYSICAL STATES
FORM
:
Powder
COLOUR
:
Black
ODOUR
:
Odourless
SDS PAGE 3 / 6