Oki C5650n C5650n/C5650dn User's Guide - Page 93
Network Menu
View all Oki C5650n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Network Menu Note: Factory default settings are shown in bold. Item TCP/IP NETBEUI IP ADDRESS SET Settings ENABLE DISABLE ENABLE DISABLE AUTO MANUAL IP ADDRESS xxx.xxx.xxx.xxx Default = 198.168.100.100 SUBNET MASK GATEWAY ADDRESS FACTORY DEFAULTS WEB/IPP xxx.xxx.xxx.xxx Default = 255.255.255.000 xxx.xxx.xxx.xxx Default = 192.168.100.254 [EXECUTE] ENABLE DISABLE Explanation Enables or disables this network protocol. Enables or disables this network protocol. Change this to Manual to specify the IP address through the front panel (see next entry). Required for non-DHCP networks. Current assigned IP address. To change: • Press ENTER. • Use +/- keys to increment first octet. • Press ENTER to move on to the next octet. • Use +/- keys to increment second octet. • Press ENTER to move on to the next octet. • Use +/- keys to increment third octet. • Press ENTER to move on to the last octet. • Use +/- keys to increment 1st octet. • Press ENTER to register the new address. Current assigned subnet mask. To change, proceed as above. Current assigned gateway address. To change, proceed as above. Specifies whether or not to initialize the network menu. Enables or disables Web config. facility and Internet Printing Protocol. This item will not appear in the menu if TCP/IP is set to DISABLE. C5650n/C5650dn User's Guide Lists of Available Settings by Menu • 93