Oki C6100n Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl
Oki C6100n Manual
View all Oki C6100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C6100n manual content summary:
- Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 1
- Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 2
by Oki Data Americas, Inc. All Rights Reserved Document Information OkiLAN 8300e Network Print Server User's Guide for the C6100 Series drivers and manuals are available from the web site: http://www.www.okiprintingsolutions.com Trademark Information Oki and Microline are registered trademarks of Oki - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 3
20 Interface 22 File menu 22 Status Menu 23 Setup Menu 24 Oki Device Setup 25 IP Address Setup 39 Option Menu 40 Help Menu OKI LPR 72 System Requirement 72 To install the OKI LPR utility 72 Uninstallation 74 Microsoft Windows 75 Overview 75 C6100 Series Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 4
119 Supported Versions 119 Printing the Network Interface Card Configuration Sheet . 119 Installation 120 Macintosh Printer Setup 121 OS X.1 and above 121 Troubleshooting 122 Self-diagnostic test 122 TCP/IP 122 NetWare 124 EtherTalk 126 NetBEUI 127 C6100 Series Network User's Guide Table - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 5
print server supports IEEE802.2, IEEE802.3, Ethernet-II and SNAP and can detect those frame types automatically. Also, it supports major printers, change the emulation in the Printer Menu settings to Auto or PS before printing the self-diagnostic test and settings. C6100 Series Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 6
supported in print server mode SNMP EtherTalk ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP NetBEUI SMB, NetBIOS DDNS, WINS, Rendezvous/Bonjour Self-diagnostic test printing Banner supported Monitoring/configure by Web browser Printer status notification by E-Mail C6100 Series Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 7
the printer power switched on, press the print server test button for more than three seconds and release. The self-diagnostic test results and configuration settings are printed. Printed self-diagnostic test sample If "NG" is displayed instead of "OK" see the "Troubleshooting" chapter. C6100 Series - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 8
Printed configuration settings sample networkinfo_pg1.jpg C6100 Series Network User's Guide Configuration - 8 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 9
networkinfo_pg2.jpg C6100 Series Network User's Guide Configuration - 9 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 10
for TCP/IP manually or by using DHCP. > Set NetWare Mode and create Queue/Print Server/Printer objects. > Zone 3.0 and higher. Operating Navigator. system that supports Web browser. AdminManager Configure the print server Windows/UNIX/ Linux. C6100 Series Network User's Guide Configuration - 10 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 11
Utility SNMP Features System requirements The printer and print server can be controlled using third-party vendor developed SNMP application. Third-party vendor developed SNMP application. C6100 Series Network User's Guide Configuration - 11 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 12
for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Configuration requires a PC with Windows 95/98/Me, Windows 2000 Advanced Server/Professional or Windows NT Server 4.0/ Work-station 4.0, Windows XP running - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 13
] netsofbutton.gif 3. Select [Install Quick Setup Utility]. install_configbut.gif 4. Select the language. admgr_qsetbut.gif sel_lang.gif 5. Select OKI Device Quick Setup. sel_quicksetup.gif 6. Follow the on-screen instructions. quicksetup.gif C6100 Series Network User's Guide Configuration - 13 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 14
network card but the network card is still operating with pre-transmission settings. 8. Click [Finish] to validate the new settings. Depending on the model, the printer may have to be switched off and on again. C6100 Series Network User's Guide Configuration - 14 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 15
its settings and the printer menu settings can be manuals for details of how to launch and use the browser. The network addresses used in this manual The following explanation uses Windows 95 and Microsoft Internet and press the [Enter] key. The Printer Status screen is displayed. status.bmp 2. - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 16
] in [Document in cache is compared to document on network]. If you change the window size of the browser immediately after changing the configuration, [Security information] may be displayed. the Ethernet address) in Password and click [OK]. C6100 Series Network User's Guide Configuration - 16 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 17
test. The root password can be changed to allow you to configure the print server and printer by using a Web browser. The default password is the last six digits of the MAC address [Confirm New Admin Password] then select [Submit] button. C6100 Series Network User's Guide Configuration - 17 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 18
The root password for configuration via Web browser is different for AdminManager/TELNET/FTP. These passwords can be set in AdminManager or TELNET. C6100 Series Network User's Guide Configuration - 18 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 19
/ SPX and must be used on a PC that is located in the same segment as the printer. To create a NetWare queue, NetWare Client 32 or IntranetWare Client should be installed on to your system. The following explanation uses Windows 98 as an example. C6100 Series Network User's Guide Configuration - 19 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 20
Installation The following explanation uses Windows 98 as an example. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu [Install Quick Setup Utility]. install_configbut.gif 4. Select the language. sel_lang.gif C6100 Series Network User's Guide Configuration - 20 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 21
5. Select OKI Device Standard Setup. sel_quicksetup.gif 6. Follow the on-screen instructions. If you want to install AdminManager on your local drive, select [Install and Execute]. Otherwise, select [Execute from CD-ROM]. adminmgr_execute.bmp C6100 Series Network User's Guide Configuration - 21 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 22
Select [Start]→[Programs]→[OKI Setup Utility]→[Admin Manager]. File menu In the [File] menu, the following item can be selected: Item Search Function Search printers in your network and list all printers that have the OkiLAN installed. C6100 Series Network User's Guide Configuration - 22 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 23
printer status is displayed: bmp10.bmp System Status Displays current OkiLAN configuration. Configuration data can be saved as log file. bmp11.bmp List of Configuration Items Displays current configuration. Configuration data can be saved as log file. bmp13.bmp C6100 Series Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 24
in your environment to access the selected printer's TELNET port. Note: The TELNET application is not included as part of the OkiLAN package. Install the TELNET package on to your system. For further information, see your Windows manual. Create a NetWare queue. Delete NetWare object. Reset - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 25
contains details for the following selectable tabs: > General > TCP/IP > Netware > EtherTalk > NetBEUI > SNMP > E-Mail (Send) > SMTP > Maintenance The following section explains each tab's functionality. C6100 Series Network User's Guide Configuration - 25 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 26
the selected network interface card. Set the subnet mask of the selected network interface card. Set the default gateway of the selected network interface card. C6100 Series Network User's Guide Configuration - 26 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 27
ID. To find corresponding items in WEB and TELNET, see the equivalent in the Configurable Items and Default Values table that starts on page 50. C6100 Series Network User's Guide Configuration - 27 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 28
mode. Check if you want to use the Bindery mode and Bindery Setup button becomes available. If it is unchecked, the button is greyed out. C6100 Series Network User's Guide Configuration - 28 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 29
for Print Server. Job Polling Time. Set print job polling interval in seconds. Set NDS tree and context where Print Server was created. bmp26.bmp C6100 Series Network User's Guide Configuration - 29 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 30
By selecting the [RPRINTER] button, this is displayed: bmp28.bmp Printer Name NDS or Bindery Show the Available print server tree in NDS from the last data's arrival to freeing of the port in seconds. Set the NetWare printer object name. C6100 Series Network User's Guide Configuration - 30 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 31
Location Use EtherTalk Protocol Printer Name Zone Name Comments Set EtherTalk protocol to enabled/disabled. Set EtherTalk Printer object name. Set Comments Use NetBEUI Protocol Set NetBEUI protocol to enabled/disabled. Short Printer Name Set a computer name for the OkiLAN. Workgroup Set a - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 32
Settings SysContact SysName SysLocation Comments Community names: SNMP Write Community, SNMP Read Community. Set SysContact (printer manager) name. Set SysName (printer model name). Set SysLocation (the location where the printer is installed). C6100 Series Network User's Guide Configuration - 32 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 33
data is received. On-Line Set sending a Trap, enabled or disabled, when the printer turns to On-Line. Off-Line Set sending a Trap, enabled or disabled, when the printer turns to Off-Line. Paper Out Set sending a Trap, enabled or disabled, when paper is out. C6100 Series Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 34
printer turns to On-Line. Off-line Set sending a Trap, enabled or disabled, when the printer turns to Off-Line. Paper Out Set sending a Trap, enabled or disabled, when paper is out. Paper Jam Set sending a Trap, enabled or disabled, when a paper jam occurs. C6100 Series Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 35
Location Printer Trap Setup . . . Comments Detail . . . Cover Open Printer Error Set sending a Trap, enabled or disabled, when the printer cover opens. Set sending a Trap, enabled or disabled, when any errors occur. C6100 Series Network User's Guide Configuration - 35 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 36
Authentication Comments Others Set Event Mode. Set information to attach. Set User ID and Password. Add comments Set SMTP port number and Reply-To address C6100 Series Network User's Guide Configuration - 36 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 37
. Set Server 1 address. Set Server 2 address. Set interval that OkiLAN checks specified events: 1, 12, or 24 hours. Set time. Set Daylight Saving time. bmp34.bmp C6100 Series Network User's Guide Configuration - 37 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 38
the button, you can setup the following service: Use TCP/IP Protocol Use NetBEUI Protocol Use FTP Service UseTelnet Service Use Web Service Use IPP Service Use SNMP Service Use SMTP Transmit Use encrypted communidation for configuration data C6100 Series Network User's Guide Configuration - 38 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 39
network interface card or not. Select [Yes]. Even if you select [No] here, the IP address that you set can be used after turning the printer OFF and ON. The requirement to turn your printer OFF and ON is dependent on the network interface card. C6100 Series Network User's Guide Configuration - 39 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 40
bmp52.bmp Set network addresses that are used to search OKI network interface cards via NetWare protocol. If there any will search all networks that AdminManager can detect. Obtain the printer name via SNMP; Set Community Name. [Search Every]: Set C6100 Series Network User's Guide Configuration - 40 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 41
Help Menu In the [Help] menu, [About] is available as well as revision information for AdminManager. C6100 Series Network User's Guide Configuration - 41 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 42
is used. Use of an incorrect IP address can cause serious problems on your network. The following explanation uses Sun Solaris 2.4 as is a problem with the configuration of the IP address (the IP address has been already set manually or by the C6100 Series Network User's Guide Configuration - 42 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 43
try to set temporary IP address. If you still have the problem after resetting the network interface card, consult the network manager. .20.127 Connected to 172.168.20.127 Escape character is '^]'. EthernetBoard OkiLAN PRINTER". login: root 'root' user needs password to login. password: User 'root - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 44
8: Setup printer trap 9: Setup SMTP (E-Mail) 97: Reset to factory set 98: Quit setup 99: Exit setup Please select (1-99)? 5. . The menu has the following hierarchical structure so for more details see the description in the appropriate numbers C6100 Series Network User's Guide Configuration - 44 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 45
- 8: EnableAuthenTrap - 99: Back to prior menu - Ref No. TCPIP-1 TCPIP-2 TCPIP-3 TCPIP-4 TCPIP-5 TCPIP-6 TCPIP-7 TCPIP-8 TCPIP-9 - SNMP-1 SNMP-2 SNMP-3 SNMP-4 SNMP-5 SNMP-6 SNMP-7 SNMP-8 - C6100 Series Network User's Guide Configuration - 45 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 46
-10 - NetWare-11 NetWare-11 NetWare-11 NetWare-11 NetWare-11 NetWare-11 NetWare-11 NetWare-11 NetWare-12 - - EtherTalk-1 EtherTalk-2 - NetBEUI-1 NetBEUI-2 NetBEUI-3 NetBEUI-4 - C6100 Series Network User's Guide Configuration - 46 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 47
) - Port-5 6: EOJ string(KANJI) - Port-6 7: Printer type - Port-7 8: TAB size (char.) - Port-8 Jam trap Trap-6 6: Cover Open trap Trap-7 7: Printer Error trap Trap-8 8: TCP#1-5 Trap address Trap-9 14 6: Cover Open trap Trap-15 7: Printer Error trap Trap-16 8: IPX Trap address Trap - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 48
1-5 2: Re-send Interval 3: Off-Line 4: Consumable Message 5: Toner Low/Out SMTP-7 SMTP-8 SMTP-9 SMTP-10 SMTP-11 6: Paper Mass Storage Error SMTP-16 11: Recoverable Error SMTP-17 12: Service Call Req. SMTP-18 13: Finisher SMTP-19 99: Back C6100 Series Network User's Guide Configuration - 48 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 49
9. Turn the printer off and on again. The network card continues to use pre-transmission settings until the printer is turned off and back on again. C6100 Series Network User's Guide Configuration - 49 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 50
supports SNMPv1, MIB-II and OKI Data Private MIB. The printer's trap address can be set in five places using TCP/IP and in one place with IPX. The printer , enabled/ disabled [OKI Device [Network [Setup 5 (0.0.0.0) Set IP address [OKI Device Setup]- [TCP/ IP]-[ 5 (0.0.0.0) [OKI Device Setup]- - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 51
] for assigning IP Address]-[RARP] ENABLE/ DISABLE SET RARP function, enabled/ disabled [OKI Device [Network [Setup TCP/ Setup]-[TCP Configuration]-[T IP]-[DHCP/ /IP]-[Use CP/IP community name is displayed as ****** for security reasons C6100 Series Network User's Guide Configuration - 51 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 52
options Notes [OKI Device [Network Setup ca tion failure, etc. [OKI Device Setup]-[SN MP]- [ Trap is disabled [OKI Device Setup]-[SN (printer manager) name [OKI printer model name) [OKI location where the printer is installed) [OKI Device Setup]-[SN To Live) value [OKI Device [Network [Setup - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 53
. If you have nine or more file servers, you should set file servers here [OKI Device [Network Setup]-[Net Configuration]-[ Ware]-[Print NetWare]-[PServ Server er Name] Mode]-[NetWare Print Time] Set print job polling interval in seconds C6100 Series Network User's Guide Configuration - 53 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 54
PSERVER on NDS NetWare-9 [OKI Device [Network Setup]-[Net Tree name NetWare-10 [OKI Device [Network Setup]-[ Printer Mode]- mode]-[Job Setup]-[Tim [Job Timeout] timeout] e Out] 4-255 (10) Set duration from the last data's arrival to freeing the port in seconds EtherTalk-1 [OKI [OKI Device - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 55
address + -prn1]) Set NetWare printer object name [OKI Device [Network [Setup printer Any Setup]-[Eth Configuration]-[E port]-[ Printer 32 characters. Name] (Default is the printer name on which OkiLAN is installed) Set EtherTalk printer object name C6100 Series Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 56
characters. the (Default is null). connected \b Backspace (0x08) \t Tab (0x09) printer before printing job \n Linefeed (0x0a) \v Vertical tab (0x0b) \f Page feed command sequence to be sent to the connected printer after printing job C6100 Series Network User's Guide Configuration - 56 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 57
) \r Carriage return (0x0d) \xnn Hex code [nn] (0xnn) \] Double quote (0x22) \\ Back slash (0x5c) Set an appropriate command sequence to be sent to the connected printer after printing job when data is sent to sjis/euc logical printer/ directory C6100 Series Network User's Guide Configuration - 57 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 58
convert any tabs Set page width when data is sent to sjis/euc logical printer/ directory. If the width of one line exceeds this value, Carriage Return and Line Feed are inserted automatical ly. The value 0 means no limitation of the line width C6100 Series Network User's Guide Configuration - 58 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 59
255 (66) port]-[Page length(line)] Set page length when data is sent to sjis/euc logical printer/ directory. If the number of lines exceeds this value, Form Feed are inserted automatical ly. The value 0 means no limitation of the line width [OKI Device Setup]-[TCP /IP]-[Use FTP/LPD Banner] [Setup - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 60
[OKI Device Setup]-[SN MP]-[Printer Trap Setup . . .]-[TCP#1- 5]-[Detail . . .]-[Cover Open] [Network Configuration]-[ SNMP Traps]-[Trap Assignments]-[C over Open] [Setup printer trap]-[Setup TCP#1-5 trap] - [Cover Open trap] ENABLE/ DISABLE C6100 Series Network User's Guide Configuration - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 61
]-[ MP]-[Printer SNMP Trap Setup . Traps]-[Trap . .]-[IPX]- Assignments]-[P [Detail . . aper Out] .]-[Paper Out] [Setup printer trap]- [Setup IPX trap] - [Paper Out trap] ENABLE/ DISABLE Set sending a trap enabled or disabled when paper is out C6100 Series Network User's Guide Configuration - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 62
/ DISABLE Set sending a trap enabled or disabled when a paper jam occurs [OKI Device Setup]-[SN MP]-[Printer Trap Setup . . .]-[IPX]- [Detail . . .]-[Cover Open] [Network ENABLE/ DISABLE Set receiving E-mail via SMTP, enabled or disabled. C6100 Series Network User's Guide Configuration - 62 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 63
SMTP [OKI Device Setup]-[SM TP]-[E-Mail Address] [Network [Setup SMTP Configuration]-[E (E-Mail)]- mail [E-Mail Settings]-[Email address] Transmit Settings]- [Printer Email Address when specified event(s) occur when DISABLE is selected C6100 Series Network User's Guide Configuration - 63 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 64
1-5] - [Toner Alert Low/Out] Assignments]-[T oner Low Toner Out] ENABLE/ DISABLE [OKI Device Setup]-[ Error] tacker Error] ENABLE/ DISABLE Notes An E-mail is sent when the printer is Off- line if this is enabled An E-mail is sent when C6100 Series Network User's Guide Configuration - 64 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 65
/ DISABLE An E-mail is sent when any service call request occurs if this is enabled [OKI Device Setup]-[SM TP]-[1-5][Selected condition] [Network Syste m Information][Printer Serial Number] Read only item. Printer serial number is displayed C6100 Series Network User's Guide Configuration - 65 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 66
]-[Syste m Information][Printer Asset Number] TELNET/ Diagnostic test print Available options Notes Any alphanumeric characters up to 8 characters. (Default is null) Set a printer asset number Configurable items vary between printers. C6100 Series Network User's Guide Configuration - 66 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 67
connected to a network. It consists of two parts: A web application based on Microsoft web server printers. > Creating statistical reports about usage of printers. > Tracking maintenance data related to printers. > Integrating with Oki Data's on-line web support. C6100 Series Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 68
95 is fully supported. Microsoft does not officially support Windows Me-PWS in Windows Me. PrintSuperVision does not support this OS. Also, Microsoft no longer supports Peer Web Service. PrintSuperVision will not work with Peer Web Service. C6100 Series Network User's Guide Configuration - 68 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 69
the option [Images off]. The hyperlinks may not work properly. Some versions of Netscape browser do not display the frames properly, and the [Back] button may not work correctly. Supported Printers PrintSuperVision provides general management information for OKI and non-OKI printers connected to - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 70
privileges. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu Installer doesn Select [PrintSuperVision]. 4. Follow the on-screen instructions. In the [Edit Data] screen, you can specify a port number for C6100 Series Network User's Guide Configuration - 70 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 71
[PrintSuperVision] from the index window and click [Add/ Remove]. When the uninstallation is completed, close [Add/ Remove Programs]. In some cases, an empty [Okidat/PrintSuperVision/] directory may be left behind. Delete the directory manually. C6100 Series Network User's Guide Configuration - 71 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 72
connected to the network via TCP/IP. This utility is for use with Windows XP, Windows 2000, Windows Me, Windows 98, Windows 95 and Window NT4.0. The utility is for those OKI printers which support TCP/IP; it redirects printing data to the lpr port of the specified IP address. System Requirement - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 73
menu. 11. Select [Printer] to accept the printer that has been added in the step 1. 12. Enter an IP address at [IP Address] and click [OK]. A printer is added to the main window. Refer to the On-line Help for information on how to use the utility. C6100 Series Network User's Guide Configuration - 73 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 74
[Program] → [Okidata] → [OKI LPR Utility] → [Uninstall OKI LPR Utility] ([Start] → [All Programs] → [Okidata] → [OKI LPR Utility] → [Uninstall OKI LPR Utility] on after installation exists in the folder to install the OKI LPR utility or the folder to spool, you cannot delete the folder. - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 75
versions of Windows, which can be configured as either a client, server or both. Although there are many variants of Windows, the principles configuration option within Windows. The network printer supports the following protocols that can be used in conjunction with the Windows operating system: > - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 76
Windows 2000/ Windows XP Method OKI LPR Utility OKI LPR Utility Microsoft LPR1 OKI LPR Utility Microsoft LPR1 Port 91001 IPP1 1These functions are built into Windows and are displayed as options when using the Add Printer cause severe network problems. Please check the Guide Microsoft Windows - 76 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 77
Windows 95/98/Me 1. Click then click [OK]. 7. The Windows installation CD-ROM may be required. Follow the remaining dialogue box prompts. Windows NT 4.0 1. Click [Start], / IP Protocol] and click [OK]. 6. The Windows NT installation CD-ROM may be required. Follow the remaining dialogue box prompts. OkiLAN - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 78
Properties] dialogue box. 7. Click [Close] in the [Local Area Connection Status] dialogue box. Windows XP 1. Click the [Start] button and select [Control Panel]. 2. Select [Network and Internet [Internet Protocol (TCP/IP)] then click [OK]. OkiLAN 8300e Network User's Guide Microsoft Windows - 78 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 79
7. The Windows XP installation CD-ROM may be required. Follow the remaining dialogue box prompts. Once the protocol has been installed and configured in Windows, the next step is to configure the TCP/IP parameters in the network printer. OkiLAN 8300e Network User's Guide Microsoft Windows - 79 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 80
the software CD provided with your printer) in the CD-ROM drive. The set-up utility starts automatically. If the set-up utility does not start, double-click on setup.exe in the Windows folder of the CD-ROM. or assign an IP address. OkiLAN 8300e Network User's Guide Microsoft Windows - 80 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 81
an environment without a DHCP server, please assign the IP address manually. If you are assigning an IP address, you need to data from the Macintosh environment. Do you use the NetBEUI protocol? Using NetBEUI makes it easy to manage your OKI product and print within the network environment of Windows - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 82
printer and not a network printer. Ensure the appropriate printer driver has been installed in Windows. Install the Oki LPR utility as described on page 72 of this manual and add the printer installed earlier. Windows NT 4.0 With Windows Oki LPR Please follow the procedure described in the Windows - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 83
name "lp" and then click [OK]. 8. Follow the instructions on the screen to finish installing the LPR-compatible printer. If the LPR port is not available, install the Microsoft TCP/IP Printing Service. Insert the printer driver for Windows NT4.0. 1. Select [Start]→[Settings]→[Control Panel] and then - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 84
] and then select [Next]. 4. Select [Local Printer], clear the [Automatically detect my printer] check box, and then select [Next]. 5. Select [Create a new port] and then [LPR Port]. 6. Select [Next] and then provide the following information: OkiLAN 8300e Network User's Guide Microsoft Windows - 84 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 85
of the host for the printer you are adding. In [Name of printer or print queue on that server] type lp. Follow the instructions on the screen to finish installing the TCP/IP printer. Port 9100 1. Select and [SNMP Status Enabled] is deselected. OkiLAN 8300e Network User's Guide Microsoft Windows - 85 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 86
then select [Next]. 4. Select [Network Printer]. 5. Select [Next]. 6. Type printer URL in text box labelled [Connect to a printer in the Internet or your Intranet], e.g. http://172.168.1.31/ipp/ lp. 7. Select [Next]. 8. Install printer driver. OkiLAN 8300e Network User's Guide Microsoft Windows - 86 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 87
], then select [Next]. 4. Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then click [Next]. 5. Select [Create a New Port] and [Type Standard TCP/IP Port]. OkiLAN 8300e Network User's Guide Microsoft Windows - 87 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 88
4. Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then click[Next]. 5. Select [Create a New Port] and select [Type Standard TCP/IP Port]. 6. Click [Next]. OkiLAN 8300e Network User's Guide Microsoft Windows - 88 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 89
]. 4. Select [A network printer, or a printer attached to another computer]. 5. Click [Next]. 6. Select [Connect to a printer on the Internet or on a home or office network] and type printer URL in text box, e.g. http:// 172.168.1.31/ipp/lp. OkiLAN 8300e Network User's Guide Microsoft Windows - 89 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 90
7. Click [Next]. 8. Install printer driver OkiLAN 8300e Network User's Guide Microsoft Windows - 90 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 91
queue. Please refer to the relevant section of this manual for additional information. NetBEUI Protocol NetBEUI is a protocol that was designed for use on small workgroups or LANs. Within Windows, NetBEUI is used for file and printer sharing between computers. It provides a simple method of printing - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 92
[Network Protocols] and then click [OK]. 7. The Windows installation CD-ROM may be required. Follow the remaining dialogue box prompts. Windows NT 4.0 1. Click the [Start] button, select [Settings box, select [NetBEUI Protocol] and click [OK]. OkiLAN 8300e Network User's Guide Microsoft Windows - 92 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 93
Windows 2000 1. Click the [Start] button, select [Settings] and then click [Network and Dial-up Connections]. 2. Double-click the [Local Properties] dialogue box. 7. Click the [Close] button in the [Local Area Connection Status] dialogue box. OkiLAN 8300e Network User's Guide Microsoft Windows - 93 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 94
XP Although you can install the NetBEUI protocol into Windows XP, it is not supported. You should be able to use NetBEUI on LAN connections although you will not be able to use this on Remote Access Service Connections. 1. In the [Start] menu, select [Settings] then [Control Panel]. 2. Double - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 95
OKILAN 1. Set up the printer driver as the default local printer. 2. In the [Start] menu, select [Settings] then [Printers]. 3. Select the relevant printer driver, then [Properties]. 4. Click only if the Workgroup name is PrintServer. OkiLAN 8300e Network User's Guide Microsoft Windows - 95 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 96
. > Printing cannot be carried out and an error message appears when jobs from other users (including other protocols) are being printed. OkiLAN 8300e Network User's Guide Microsoft Windows - 96 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 97
guide is for NetWare administrators. It should be read in conjunction with the relevant Novell NetWare manual. The latest Novell service packs and Novell client versions should be installed. Supported the file server is logged in and the printer queue is repeatedly polled to determine whether a - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 98
NIC's push-button for two seconds and then release. The Ethernet address (MAC Address) of the printer can be found on the self-diagnostic printout, which can be printed by pressing the push-button on is required to setup the OkiLan for NetWare. OkiLAN 8300e Network User's Guide Novell NetWare - 98 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 99
Use NWAdmin32 or the Pconsole utility to create and setup NetWare printer objects. Please refer to Novell documentation for instructions on how to achieve this. Use the OKI Network Card Setup Utility (Quick Setup) or other printer manager software, (AdminManager, Web browser, etc.) to configure the - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 100
Overview The OkiLAN print server supports many protocols such as LPD way to set them up from a UNIX workstation. > The network addresses used in this manual are shown as examples only. Network addresses used in your installation must be generated for your OkiLAN 8300e Network User's Guide UNIX - 100 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 101
172.168.20.127 If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server), or with the network. Reset the 20.127 Escape character is '^]'. EthernetBoard OkiLAN OkiLAN 8300e Network User's Guide UNIX - 101 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 102
'root' logged in. No. Message Value (level .1) 1 : Setup TCP/ IP 2 : Setup SNMP 3 : Setup NetWare 4 : Setup EtherTalk 5 : Setup NetBEUI 6 : Setup printer port 7 : Display Status 8 : Setup printer trap 9 : Setup SMTP Email 97 : Reset to factory set 98 : Quit setup 99 : Exit setup Please select (1- 99 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 103
protocol : DISABLE 6 : DHCP/ BOOTP protocol: DISABLE 7 : root password : " " 99 : Back to prior menu Please select (1- 99)? 6. Log out from the network interface card. Turn the printer off and on again to validate the following settings. OkiLAN 8300e Network User - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 104
ping command to confirm connection with the network card. Example: for host name PRINTER # ping PRINTER If there is no reply, then there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server) or with OkiLAN 8300e Network User - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 105
you still have the problem after resetting the network interface card, consult the network manager. 4. Register the printer in the /etc/printcap file. Example: for host name PRINTER, to create a spool/PRINTER_lp #touch/usr/spool/PRINTER_lp/PRINTER _lp_errs OkiLAN 8300e Network User's Guide UNIX - 105 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 106
register remote printers on Open Windows. However, it cannot be used here, as the data recipient and 2.8 (known as Solaris 8) and an OKI printer as examples. The absolute path and method Refer to the workstation manual for more details. 1. Confirm that the IP address of the printer has been set. 2. - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 107
ping command to confirm connection with the network card. Example: for host name PRINTER # ping PRINTER If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server), or with the network. Reset the network - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 108
network manager. The following example uses HP-UX10.20 and an OKI printer as examples. The absolute path and manual for more details. 1. Confirm that the IP address of the printer has been set. See network interface card IP address configuration for more information. OkiLAN 8300e Network User's Guide - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 109
ping command to confirm connection with the network card. Example: for host name PRINTER # ping PRINTER If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server), or with the network. Reset the network - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 110
called PRINTER_lp to print to host PRINTER a. Register the remote printer. # /usr/sbin/lpadmin . # /bin/enable PRINTER_lp d. Enable the printer spooler. # /usr/sbin/lpsched To customise output it using the lpadmin command. Example: for printer PRINTER_lp, with model file called PRINTER_model # / - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 111
# ping PRINTER If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by for the OKI printer registered as the print server a. Add the print server. # ruser -a -p okiprinter OkiLAN 8300e Network User's Guide UNIX - - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 112
to the item [Add print queue]. # smit mkrque b. Select [remote] (the printer connected to the remote host) from [Type of connection]. c. Select [Standard procedure be added "printer_lp" Host name of the remote server "printer" Queue name of the remote server "lp" Type of print spooler - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 113
section uses the printing of print file test.prn with printer name PRINTER_lp as an example. Logical printers The OkiLAN print server includes three logical printers. > lp must be used for printing a file created using the printer driver. > sjis must be used for printing a text file of Shift - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 114
on UNIX operating system specification (e.g. Solaris 2.x). FTP printing FTP (File Transfer Protocol) is used for transferring a file with TCP/ IP. If the print data is sent to a logical printer via FTP, it is printed. Refer to the workstation's manual for details of the ftp command. The following - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 115
the printer driver. sjis must be used for printing a text file of Shift JIS Kanji code. euc must be used for the printing a text file of the EUC Kanji code Logical directory lp sjis euc Printer printers. > You can not send data printer (or IP address 172.168.20.127). # ftp printer - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 116
to the logical directory; it is not possible to output print data to the root directory. 2. Move to the preferable logical directory a binary file converted by the printer driver is transferred, the transfer mode has to be BINARY mode. Example: changing transfer mode to binary mode and verifying - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 117
In addition, printer status can be verified by specifying the directory after the stat (lp, sjis, euc). Example: displaying network card status ftp> quote stat 211-FTP server status: Connected to: 172.168.20.10.000.00 User logged in: root Transfer type: BINARY OkiLAN 8300e Network User's Guide UNIX - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 118
Data connection: Closed. 211 End of status. ftp> Example: displaying the network card status (directory name: lp) ftp> quote stat /lp 211-FTP directory status: Ready 211 End of status ftp> OkiLAN 8300e Network User's Guide UNIX - 118 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 119
guide is for administrators and it should be read in conjunction with the relevant Macintosh manual. The latest Macintosh service packs should be installed. Supported Versions Mac OS X.1 and forward are supported. Printing the Network Interface Card Configuration Sheet The printer's configuration - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 120
, in the CD-ROM drive. 2. Double-click the icon that appears on the desktop. 3. Open the MAC folder. 4. Double-click the Printer Installer icon, click Continue. 5. Installer displays with the driver selected. 6. Select any utilities you want to install. Click Install. OkiLAN 8300e Network User - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 121
. 1. Run the Print Server or Print Setup Utility. 2. Select OKI TCP/IP from the drop-down menu. 3. Enter the printer IP address. 4. From the Printer Model drop down menu, select your printer model. 5. Click Add. 6. Quit the Print Center. OkiLAN 8300e Network User's Guide Apple® Macintosh® - 121 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 122
/IP Printer cannot find the network interface card. Turn the printer off and on again. Confirm the network interface is enabled on the printer. Check there is a response to the interface card command. Check the network cable is correctly connected. OkiLAN 8300e Network User's Guide Troubleshooting - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 123
lp, euc and sjis. Use lp by default as euc and sjis are specific to printers with PostScript available. Incorrect User name on the banner page. If printing with lpr, name is not printed. The Printer name printed is the Logical Directory name. OkiLAN 8300e Network User's Guide Troubleshooting - 123 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 124
on again. Confirm the network interface is enabled on the printer. Check the network cable is correctly connected. Change the File Server and the Print Server name set in the NIC are the same. Check the Printer name displayed in the Print Server monitor of the File Server and the NetWare Port name - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 125
printed. A PostScript Banner page cannot be printed in NetWare 3.12 Remote Printer mode. If a PostScript printer is used and a Banner Page is printed, PostScript error is displayed. Turn the banner output Off in the client's printer settings. OkiLAN 8300e Network User's Guide Troubleshooting - 125 - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 126
Chooser and the Setup Utility. Turn the printer off and on again. Check the network cable driver is selected in the Chooser. Check the EtherTalk protocol is set to Enable. Print the NIC settings and confirm that the EtherTalk Port name is not blank. OkiLAN 8300e Network User's Guide Troubleshooting - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 127
The network interface card is not identified. Turn the printer off and on again. Check the network cable is the NIC is different from the computer name on the network. Error writing to Prn1. Check the printer is online. If there is an error message indicating the paper has run out, add more paper - Oki C6100n | Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 128
Oki Data Americas, Inc. 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620 Tel: (856)235-2600 Fax: (856)222-5320 59385005