Oki C6100n Guide: Network User's, OkiLAN 8300e for C6100 Series (American Engl - Page 39
IP Address Setup, Set [Ethernet Address] and [IP Address] and select [OK].
View all Oki C6100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
IP Address Setup If you only use TCP/IP and the OkiLAN has not yet been configured, occasionally it may not be displayed on AdminManager. You can configure the IP address of the OkiLAN by this function. 1. Select [IP Address Setup] from the [Setup] menu. 2. Set [Ethernet Address] and [IP Address] and select [OK]. bmp42.bmp > The Ethernet Address (MAC address) is displayed during the self-diagnostic test. 3. AdminManager asks whether you want to initialize the network interface card or not. Select [Yes]. Even if you select [No] here, the IP address that you set can be used after turning the printer OFF and ON. The requirement to turn your printer OFF and ON is dependent on the network interface card. C6100 Series Network User's Guide Configuration - 39