Oki C711DW Maintenance Manual - Page 109

Oki Data CONFIDENTIAL When the [CANCEL] key is pressed while test is in progress (while the [ON LINE] lamp is lighting), the screen returns to the state of step 2. The same as the key operations of step 2. During execution of DENS ADJ EXECUTE. Setup of the density correction parameter is displayed. The automatic setting of the density sensor sensitivity correction value is executed. (The [ON LINE] lamp flashes.) When the test is complete, the test result (OK or error name) is displayed in the upper row of the display area, and ****RESULT is displayed in the lower row of the display area OK DENS ADJ RESULT When the [MENU+] key is pressed, the test results are displayed by incrementing them. When the [MENU-] key is pressed, the test results are displayed by decrementing them. Pressing the [BACK] key returns the screen to the state of step 2. When the [CANCEL] key is pressed while test is in progress (while the [ON LINE] lamp is lighting), the screen returns to the state of step 2. Remarks The following message is displayed during initialization, when the cover is opened and during alarm. NG DENS ADJ RESULT 4. Repeat step 3 as required. 5. Maintenance Menu 5. Pressing the [BACK] key terminates the test. (Returns to the status of step 1.) Density correction test items Display Details DENS ADJ EXECUTE Executing the density correction DENS ADJ PAR-SET Setting the control values with respect to the automatic density correction DENS ADJ RESULT Referring to result of the density correction AUTO CALIBRATION Automatic setting of the density sensor sensitivity correction value 44205401TH Rev.1 109 /