Oki C8800n C8800 User Guide (Amer Eng) - Page 83

CAUTION! The green surface at the base of each image drum is very delicate and light sensitive. • Do not touch the green surface. • Never expose the drum to direct sunlight or to very bright room lighting. • Do not expose it to normal room light for more than 5 minutes. • If the image drum must be out of the printer for longer than 5 minutes, place the image drum inside a black plastic bag or carefully place it in a drawer or cabinet to keep it away from light. 4. Locate the two blue locks (1) and the handle (2). Belt in Situ.eps 5 6 5. Turn the two locks about 45° counterclockwise to release the belt. 6. Pull up the handle and lift the belt unit out of the printer. 7. Unpack the new belt unit. Hold it with the blue handle toward the front of the printer. 8. Place the drive gear at the back of the belt unit in the gear at the right rear corner of the printer. Lower the belt unit into the printer. 9. Turn the two belt locks about 45° clockwise to secure the belt unit in place. C8800 User's Guide 83