Oki C941dn C941dn Safety/Warranty/Regulatory Guide - Page 9
Handling and storage, Exposure controls/personal protection, Physical and chemical properties
View all Oki C941dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Handling and storage Precautions for Safe Handling Conditions for Safe Storage, Including Any Incompatibilities Specific End Uses : Keep out of reach of children. Avoid dust formation. Handle in adequately ventilated areas. Do not breathe dust. Do not get in eyes or on skin. Keep away from excessive heat and sources of ignition such as sparks and open flames. Ensure all the equipment is electrically earthed/grounded before beginning operation. : Keep out of reach of children. Keep container closed and store at room temperature. Keep away from excessive heat and sources of ignition. Do not store with strong oxidizers. : This product is a toner used in printers/copiers. 8. Exposure controls/personal protection Control Parameters: Product toner USA OSHA PEL Total dust: 15mg/m3 Respirable fraction: 5mg/ m3 ACGIH TLV Inhalable particulate: 10mg/m3 Respirable particulate: 3mg.m3 EU OEL Not established DFG MAK Inhalable fraction: 4mg/m3 Respirable fraction: 1.5mg/ m3 Ingredient(s) Carbon black Amorphous silica Titanium dioxide USA OSHA PEL 3.5mg/m3 20mppcf* or 80/%Sio2 mg/ m3 (* million particles per cubic foot) Total dust: 15mg/m3 ACGIH TLV 3.5mg/m3 Not listed 10mg/m3 EU OEL Not established Not established Not established DFG MAK Not established Inhalable fraction: 4mg/m3 Not established Exposure Controls: Engineering Controls DNEL(s) PNEC(s) : No special ventilation equipment needed under intended use of this product. But, ventilation equipment is necessary in case of dust formation. : Not available. : Not available. Individual Protection Measures: Eye/Face Protection : Skin Protection : Respiratory Protection : Not Required Not Required Not Required Personal protective equipments (gloves) are recommended when handling this product in large quantities. Personal protective equipments (glasses) are recommended when handling this product in large quantities. Personal protective equipments (mask) are recommended when handling this product in large quantities. 9. Physical and chemical properties Information on Basic Physical and Chemical Properties: Appearance Odor pH Melting Point/Freezing Point (°C) : Fine black powder. : None or slight plastic-like odor. : Not applicable. : Not applicable. 9 - English