Oki LE810DT LE810DT User Guide (English) - Page 30
cleared. After the error is cleared, retighten the green Sensor Adjust Knob.
View all Oki LE810DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
7. Adjust the media sensor to compensate for irregularities in the media (i.e.: notch, tag hole, gap, perforation or markings). The proper position will be media-dependent. To properly adjust the sensor position, loosen the green Sensor Adjust Knob located on the bottom side of the Media Transport Assembly and move the sensor in ¼ inch increments (or finer) until the sensor error is cleared. After the error is cleared, retighten the green Sensor Adjust Knob. 8. Pull out the bottom of the Outside Media Guide so that it is upright, then push the guide inward until it barely contacts the outside edge of the media. LE810DT User's Guide 30
LE810DT User’s Guide
30
7.
Adjust the media sensor to compensate for irregularities in the media (i.e.:
notch, tag hole, gap, perforation or markings). The proper position will be
media-dependent.
To properly adjust the sensor position, loosen the green
Sensor Adjust Knob located on the bottom side of the Media Transport Assembly
and move the sensor in ¼ inch increments (or finer) until the sensor error is
cleared. After the error is cleared, retighten the green Sensor Adjust Knob.
8.
Pull out the bottom of the Outside Media Guide so that it is upright, then push
the guide inward until it barely contacts the outside edge of the media.