Oki Pro6410 NeonColor Users Guide

Oki Pro6410 NeonColor Manual

Get Oki Pro6410 NeonColor PDF manuals and user guides View all Oki Pro6410 NeonColor manuals
Add to My Manuals
Save this manual to your list of manuals

Oki Pro6410 NeonColor manual content summary:

  • Oki Pro6410 NeonColor | Users Guide - Page 1
    Pro6410 NeonColor User's Guide
  • Oki Pro6410 NeonColor | Users Guide - Page 2
    and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. drivers and manuals are available from: http://www.oki.com/printing/ Copyright © 2015. All rights reserved. OKI is a registered trademark of Oki Electric Industry
  • Oki Pro6410 NeonColor | Users Guide - Page 3
    Data Corporation, 4-11-22 Shibaura, Minato-ku, Tokyo 108-8551, Japan IMPORTER TO THE EU/AUTHORISED REPRESENTATIVE Oki Europe Limited Blays House Wick Road Egham Surrey, TW20 0HJ United Kingdom For all sales, support and general enquiries contact your local distributor. ENVIRONMENTAL INFORMATION ww
  • Oki Pro6410 NeonColor | Users Guide - Page 4
    EU/authorised representative 3 Environmental information 3 Contents 4 Notes, cautions and warnings 6 About this guide 7 Documentation suite 7 What this book describes 7 On-line usage 8 Printing pages 8 Introduction 9 Printer overview 10 Front view 10 Rear view 11 Changing the display
  • Oki Pro6410 NeonColor | Users Guide - Page 5
    Installing upgrades 70 Memory upgrade 70 Additional paper tray(s 73 Setting the driver device options 74 Windows 74 Mac OS X 74 Storage cabinet 74 Troubleshooting 75 Major printer components and paper path 75 Paper sensor error codes 76 Clearing paper jams 77 Specifications 83 Index 84
  • Oki Pro6410 NeonColor | Users Guide - Page 6
    NOTES, CAUTIONS AND WARNINGS NOTE A note provides additional information to supplement the main text. CAUTION! A caution provides additional information which, if ignored, may result in equipment malfunction or damage. WARNING! A warning provides additional information which, if ignored, may result
  • Oki Pro6410 NeonColor | Users Guide - Page 7
    . This is a paper document that is packaged with the product. > User's Guide: helps you become familiar with your product and make the best use of its many features. Also included are guidelines for troubleshooting and maintenance to ensure that it performs at its best. Additionally, information is
  • Oki Pro6410 NeonColor | Users Guide - Page 8
    guide is intended to be read on screen using Adobe Reader. Use the navigation and viewing tools provided in Adobe Reader. There are many cross-references within this book, each highlighted as blue text. When you click on a cross-reference the display will instantly jump to the part of the manual
  • Oki Pro6410 NeonColor | Users Guide - Page 9
    INTRODUCTION Congratulations on choosing this color printer. Your printer includes these features: > ProQ/High Quality, multi-level technology produces subtler tones and smoother gradations of color to lend photographic quality to your documents. > 600 x
  • Oki Pro6410 NeonColor | Users Guide - Page 10
    PRINTER OVERVIEW FRONT VIEW 9 10 11 1 2 7 4 6 8 7 3 5 1. Output stacker, face down. Multi purpose tray. Used for feeding heavier paper stocks, film media and transfer media. Also for manual feeding of single sheets when required. 5. Paper level indicator. 6. Front cover release lever. 7.
  • Oki Pro6410 NeonColor | Users Guide - Page 11
    is mainly used for heavy print media and transfer media. When used in conjunction with the multi purpose feed tray, the paper path through the printer is essentially straight. This avoids bending the paper around curves in the paper path and enables feeding of up to 250g/m² media. Introduction > 11
  • Oki Pro6410 NeonColor | Users Guide - Page 12
    . NOTE If your machine is connected locally (via USB), when it transitions to Sleep mode its status is viewed as off-line. To use the printer in this state, you must press the Power Save / Wake Up button to exit sleep mode. SWITCHING OFF 1. Press the Enter button on the control
  • Oki Pro6410 NeonColor | Users Guide - Page 13
    explains how to use each type. The best performance will be obtained when using standard 75~90g/m² paper designed for use in copiers and laser printers. Suitable types are: > Color Copy by Mondi 90g/m² Use of heavily embossed or very rough textured paper is not recommended. CASSETTE TRAYS SIZE A6
  • Oki Pro6410 NeonColor | Users Guide - Page 14
    FACE UP STACKER The face up stacker at the rear of the printer should be opened and the tray extension pulled out when required for use. In this condition paper will exit via this path, regardless of driver
  • Oki Pro6410 NeonColor | Users Guide - Page 15
    LOADING PAPER CASSETTE TRAYS 1. Remove the paper tray from the printer. 2. Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that all sheets are properly separated, then tap the edges of the stack on a flat surface to make it flush again (3). 2 1 3 Loading paper > 15
  • Oki Pro6410 NeonColor | Users Guide - Page 16
    face down and top edge towards the front of the printer), as shown. b a b > Adjust the rear stopper (a) and paper guides (b) to the size of paper being used. To prevent paper jams: > Do not leave space between the paper and the guides and rear stopper. > Do not overfill the paper tray. Capacity
  • Oki Pro6410 NeonColor | Users Guide - Page 17
    (rear) stacker (a) is closed (the paper exits from the top of the printer). Stacking capacity is approximately 250 sheets, depending on paper weight. > For face sure the face up (rear) stacker (a) is open and the paper support (b) is extended. Paper is stacked in reverse order and tray capacity is
  • Oki Pro6410 NeonColor | Users Guide - Page 18
    paper supports (b). a c d b d 3. Press gently down on the paper platform (c) to ensure it is latched down. 4. Load the paper and adjust the paper guides (d) printed side up and top edge into the printer. > Transfer media should be loaded face up into the printer. > Do not exceed the paper capacity
  • Oki Pro6410 NeonColor | Users Guide - Page 19
    pop-up menus. NOTE Example driver screenshots are used throughout this manual and as such may not represent the driver screens for your machine Windows: 1. Directly from the Windows "Printers" folder ("Printers and Faxes" folder in Windows Vista, "Devices and Printers" folder in Windows 7 or later
  • Oki Pro6410 NeonColor | Users Guide - Page 20
    Advanced options are also available, such as how to download TrueType fonts, and whether advanced options such as booklet printing are available. The printer driver contains extensive on-line help for these items to help you make the most appropriate choices. How to access the driver screens > 20
  • Oki Pro6410 NeonColor | Users Guide - Page 21
    In your application, open the file you want to print. 2. On the File menu, choose Print.... 3. In the application's Print dialogue, make sure the printer shown is the appropriate one, and click Properties. Mac 1. In your application, open the file you want to print. 2. On the File menu, choose Print
  • Oki Pro6410 NeonColor | Users Guide - Page 22
    all of the available hardware features are listed in the driver. This procedure is essential if you subsequently add extra hardware features to your printer after the drivers have been installed and set up. Remember that if your machine is shared between users on different computers, the driver must
  • Oki Pro6410 NeonColor | Users Guide - Page 23
    performs color matching by using an ICC profile. However, you cannot specify input and output profiles by downloading a specific ICC profile, as your printer uses a special link profile which considers the use of white/black toner. Use the built-in color matching function of your application when
  • Oki Pro6410 NeonColor | Users Guide - Page 24
    2. From Color Mode, select Color Print. This screen is normally not used. Color Print Details 1,2 panel This screen is normally not used. Your printer performs color matching by using an ICC profile. However, you cannot specify input and output profiles by downloading a specific ICC profile, as your
  • Oki Pro6410 NeonColor | Users Guide - Page 25
    GRAY SCALE PRINT (WHITE/BLACK) By selecting this, printing will occur only in black and white. Windows 1. On the print dialog box, click the Color tab. 2. Under Color Mode, select Gray Scale Print (White/Black). Mac OS X 1. On the print dialog box, select the Color Options panel. 2. From Color Mode,
  • Oki Pro6410 NeonColor | Users Guide - Page 26
    may be set when selecting Color Print as the Color Mode. PRINT MODE This setting is used when a white Print Cartridge is loaded in the printer. This function can be used when Color Print is selected as the Color Mode and when White is set as the Print Cartridge. White On
  • Oki Pro6410 NeonColor | Users Guide - Page 27
    your preferred setting. BLACK Select when black Print Cartridge is loaded in printer. Black Finish may be set when selecting Color Print as the Color FINISH This setting is used when a black Print Cartridge is loaded in the printer. This function can be used when Color Print is selected as the Color
  • Oki Pro6410 NeonColor | Users Guide - Page 28
    Windows 1. On the print dialog box, click the Color tab. 2. From Color Mode settings, select Color Print. 3. From Print Cartridge settings, select Black. 4. From Black Finish, select your preferred setting. Mac OS X 1. On the print dialog box, select the Color Options panel. 2. From Color Mode,
  • Oki Pro6410 NeonColor | Users Guide - Page 29
    FINISHING OPTIONS Your printer offers a wide selection of document finishing options that help you to control the final form of your printed document. For detailed information on finishing options
  • Oki Pro6410 NeonColor | Users Guide - Page 30
    driver. In this case the job is stored temporarily in printer memory, and the printer performs collation. This method is normally faster, but may not work from all applications. If you experience problems using printer collate, use the collate option in your application's print options instead
  • Oki Pro6410 NeonColor | Users Guide - Page 31
    print from the scrolling list. 2. Click the Collate checkbox. MAC OS X 1. Select Printer Features (1). 1 2 3 2. From the Feature Sets menu (2), select Job Options. 3. Select the Collate checkbox (3) to enable printer collate. NOTE The Collate option in the Copies & Pages dialogue is for application
  • Oki Pro6410 NeonColor | Users Guide - Page 32
    print jobs to help locate each user's job in a paper stack at the printer. In Windows this page is called a "separator page". On the Mac it is page 33. WINDOWS SEPARATOR PAGE The separator page is set from the printer driver's default properties window. Access to this is directly from Windows,
  • Oki Pro6410 NeonColor | Users Guide - Page 33
    PostScript Drivers. Do not confuse Cover Print with "Cover Page". A Cover Page is an identification sheet inserted between the print jobs of a network printer. See "Separating queued print jobs" on page 32. MAC OS X 1. Select Paper Feed (1). 1 2 2. Select the trays or paper types you wish to use
  • Oki Pro6410 NeonColor | Users Guide - Page 34
    can be from approximately 64mm to 215.9mm, and its length can be from 127mm to 355.6mm. Actual limits vary slightly depending on which printer driver you use and your computer's operating system. Some applications software may not produce the desired results with non-standard print media sizes, and
  • Oki Pro6410 NeonColor | Users Guide - Page 35
    4. You can also position the page image on the paper to avoid printing too close to the edge by choosing an Offset. Offset relative to perpendicular direction adds to your left margin. Offset relative to parallel direction adds to your top margin (normal feed) or bottom margin (flipped feed). 5.
  • Oki Pro6410 NeonColor | Users Guide - Page 36
    PRINTING MULTIPLE PAGES ON ONE SHEET (N-UP) This feature scales the page size of your document for printing and reproduces several pages per sheet. This is useful when you simply want to proof your page layout, or distribute your document in a more compact format. It saves paper, bulk, weight and
  • Oki Pro6410 NeonColor | Users Guide - Page 37
    MAC OS X 1. Select Layout (1). 1 2 3 4 2. From the Pages per Sheet menu (2), select the number of pages you want to fit onto a single sheet of paper. 3. If required, change the direction (3) the document pages are laid out on each sheet of paper. 4. If required, you can surround each page with a
  • Oki Pro6410 NeonColor | Users Guide - Page 38
    SCALE TO PAGE Scale to Page allows you to print data formatted for one size page onto a different size page, without modifying the print data. This feature is not available with the Windows PS driver. MAC OS X 1. Select Paper Handling (1). 1 2 3 2. Check the Scale to Fit Paper Size checkbox (2). 3.
  • Oki Pro6410 NeonColor | Users Guide - Page 39
    tab, click Advanced, and select the required film size from the Paper Size drop-down list. 2. In the same window, select the Films from the Printer Features - Media Type drop-down list. 3. Click OK to close the Advanced Options window. 4. From the Source drop-down list select Multi-Purpose Tray
  • Oki Pro6410 NeonColor | Users Guide - Page 40
    MAC OS X 1. In the driver's window, select the Multi-Purpose Tray from the All Pages From drop-down list. 2. Move to the Printer Features window, select the Films from the Media Type drop-down list in the Feature Sets: Paper Input Options. Finishing options > 40
  • Oki Pro6410 NeonColor | Users Guide - Page 41
    HOW TO PRINT WITH APPLICATION SETTING To print image data without the white background, you need to configure the application setting. If printing image data without configuring the application setting, white is printed on the whole background of the image. The following pages explain how to
  • Oki Pro6410 NeonColor | Users Guide - Page 42
    ADOBE ILLUSTRATOR This section describes how to print the image data without white background by Adobe Illustrator CS. 1. Load the image data. 2. Create a path around the area of the placed picture image that you want to mask. 3. Select the created path and the picture image, and create a clipping
  • Oki Pro6410 NeonColor | Users Guide - Page 43
    enable new settings.] is displayed on the operation panel, turn of power. OI 4. Press the cover release and open the printer's top cover fully. 5. Remove the White Printer Cartridge, taking care not to touch the green cylinder on the bottom of the Print Cartridge. NOTE > To prevent photodegredation
  • Oki Pro6410 NeonColor | Users Guide - Page 44
    6. Take the new Black Print Cartridge out of its packaging and place it on the flat place. Remove the protective sheets and desiccant from Print Cartridge. Push the colored release lever away from you. 7. Gently install Black Print Cartridge. 8. Close the top cover. 9. After placing removed White
  • Oki Pro6410 NeonColor | Users Guide - Page 45
    Black Print Cartridge for printing is laid out below. WINDOWS 1. In the driver's Paper/Quality tab, click Advanced, and select the User Type 1~5, from the Printer Features-Media Type drop-down list. 2. Click OK to close the Advanced Options window. MAC OS X 1. In the driver
  • Oki Pro6410 NeonColor | Users Guide - Page 46
    6. Back Button 8. Cancel Button Provides advice when an error such as incorrect paper size occurs. 10. Power Save/ Wake Up Button Displays the printer status and any error messages. Switches between ONLINE and OFFLINE. Exits the menu and goes ONLINE when pressed in the Menu mode. Scrolls the HELP
  • Oki Pro6410 NeonColor | Users Guide - Page 47
    menus. Where applicable, factory default settings are shown in bold type in the following tables. In the normal operating condition, known as "standby," the printer's LCD window will show Ready to Print. In this condition, to enter the menu system, press the up and down Menu buttons on the operator
  • Oki Pro6410 NeonColor | Users Guide - Page 48
    of the network. Displays the Subnet Mask of the network. Displays the Gateway Address of the network. Displays the MAC Address of the printer. Displays the Network firmware revision. Displays the Web remote version. Displays the IPv6 Address(Local) of the network.a Displays the IPv6 Address(Global
  • Oki Pro6410 NeonColor | Users Guide - Page 49
    a quick method of listing various items stored within the printer. ITEM Configuration Network ACTION Execute Execute Demo Page DEMO1 Execute . SHUTDOWN MENU This item should always be selected before switching the printer off, to ensure that no data is lost. ITEM Shutdown Start SETTINGS Execute
  • Oki Pro6410 NeonColor | Users Guide - Page 50
    MENUS ITEM Tray Configuration ACTION EXPLANATION Paper Feed Select tray. Select by scroll and Enter button. Default: Tray 1 Auto Tray Switch Default: On Tray Sequence Default: Down Unit of Measurement Default: millimeter Tray1 Config Default: Paper Size: Media Type: Media Weight: A4/A5/A6/B5/
  • Oki Pro6410 NeonColor | Users Guide - Page 51
    ITEM Tray Configuration (cont.) ACTION MPTray Config Paper Size: Media Type: Media Weight: Tray Usage: Tray 2 Config* Tray 3 Config* EXPLANATION A4/A5/A6/B5/ Legal14/Legal 13.5/Legal13/ Letter/ Executive/ Custom/Com-9 Envelope/Com10 Envelope/ Monarch Envelope/DL Envelope/C5/ Index Card Plain/
  • Oki Pro6410 NeonColor | Users Guide - Page 52
    1 Clearable Warning Default: ONLINE Auto Continue Default: Off Manual Timeout Default: 60 Wait Timeout Default: 40 Low Toner working after you restart the printer. If you change the settings by menu operation,the message prompting you to restart the printer will be displayed. Used for
  • Oki Pro6410 NeonColor | Users Guide - Page 53
    ITEM System Adjust (cont.) ACTION Drum Cleaning Default: Off Hex Dump Execute EXPLANATION Sets whether to rotate the drum in idle prior to printing in order to reduce horizontal white lines. Be warned that this will shorten the Print Cartridge life by as much as this rotation. Select by
  • Oki Pro6410 NeonColor | Users Guide - Page 54
    over TCP Enable Disable Enable Disable NetWare EtherTalk Frame Type IP Address Set Enable Disable Enable Disable Auto 802.2 802.3 Ethernet II SNAP Auto Manual IPv4 Address xxx.xxx.xxx.xxx Subnet Mask xxx.xxx.xxx.xxx Display Condition: TCP/IP should be enabled. Sets Enable/Disable of NETBEUI
  • Oki Pro6410 NeonColor | Users Guide - Page 55
    be enabled. When Normal is selected, the network can work effectively even when it is connected to a HUB that has a spanning tree feature. However, printer start up time gets longer when computers are connected with two or three small LANs. When Small is selected, computers can cover from two or
  • Oki Pro6410 NeonColor | Users Guide - Page 56
    ITEM Print Setup (cont.) PS Setup Color Setup Memory Setup SETTINGS Resolution X Dimension Y Dimension Network Protocol 600dpi 600x1200dpi 600dpi multilevel 64 mm ~ 210 mm ~ 216 mm 127 mm ~ 297 mm ~ 1321 mm ASCII/RAW USB Protocol ASCII/RAW CMY 100% Density Enable/Disable Receive Buffer Size
  • Oki Pro6410 NeonColor | Users Guide - Page 57
    ITEM Flash Memory Setup System setup Time Setup Change Password Initialize SETTINGS Execute Near Life Status Enable/Disable Near Life LED Enable/Disable Date Format Time Zone Daylight Saving Time Setting New Password mm/dd/yyyy dd/mm/yyyy yyyy/mm/dd -13:00 ~ 0:00 ~ +13:00 On Off 01/01/2000
  • Oki Pro6410 NeonColor | Users Guide - Page 58
    ITEM Settings Reset Settings Save Settings Restore Settings SETTINGS Execute Execute Execute EXPLANATION Resets EEPROM of CU. Resets User menu to the factory default. If Execute is selected, exits from the menu. Saves menus currently set. With this function, the menus with which operation was
  • Oki Pro6410 NeonColor | Users Guide - Page 59
    this menu is selected, the printer performs AutoAdjust Registration. This adjustment must be executed when the printer is idling. Prints the pattern System Administrators. In order to gain access to this menu, follow the instructions in "How to change the settings - administrator" on page 47. This
  • Oki Pro6410 NeonColor | Users Guide - Page 60
    Enable / Disable Enable / Disable Enable / Disable ENABLES / DISABLES the USB port. Selects the interface speed. After setting change the menu, the printer restarts on exit. Enables or disables the SOFT RESET command. OFFLINE RECEIVE. Specifies whether to ENABLE or DISABLE a USB serial number. The
  • Oki Pro6410 NeonColor | Users Guide - Page 61
    System setup ITEM High Humid Mode SETTINGS Off On Menu Lockout On Off EXPLANATION If moistened paper is curled significantly after printing, change the setting to ON. Note: Moistened paper means paper that has been left in a high-humidity environment. Set On/Off of Menu Lockout function When
  • Oki Pro6410 NeonColor | Users Guide - Page 62
    toner wastage and possible toner sensor errors, do not change the Print Cartridge(s) until "Print Cartridge Life" is displayed. The toner used in this printer is a very fine dry powder. It is contained in four cartridges: one each for white, magenta, yellow and cyan. Have a sheet of paper handy
  • Oki Pro6410 NeonColor | Users Guide - Page 63
    it by its top centre, lift the print cartridge up and out of the printer. 4. Put the assembly down gently onto a piece of paper to prevent toner more than 5 minutes. If the Print Cartridge needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag to
  • Oki Pro6410 NeonColor | Users Guide - Page 64
    the top cover and press down firmly at both siders so that the cover latches closed. NOTE If you need to return or transpot your printer for any reason, please make sure you remove the print cartridge beforehand and place in the bag provided. This is to avoid toner spillage. REPLACING
  • Oki Pro6410 NeonColor | Users Guide - Page 65
    5 minutes. If the Print Cartridge needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag two fasteners 90° to the left. This will release the belt from the printer chassis. 6. Pull the lifting bar (b) upwards so that the belt tilts up towards the front
  • Oki Pro6410 NeonColor | Users Guide - Page 66
    the two fasteners (a) 90° to the right until they lock. This will secure the belt unit in place. 9. Replace the four Print Cartridges, into the printer in the same sequence as they came out: white (nearest the rear), magenta, yellow and cyan (nearest the front). 10. Finally, close the top cover
  • Oki Pro6410 NeonColor | Users Guide - Page 67
    their slots in the metal partition which separates the fuser area from the Print Cartridges. 8. Push the two retaining levers (b) towards the rear of the printer to lock the fuser in place. b 9. Finally, close the top cover and press down firmly at both sides so that the cover latches closed
  • Oki Pro6410 NeonColor | Users Guide - Page 68
    Use a clean, moist, lint-free cloth for cleaning. Do not use benzine, thinners or alcohol as a cleaning agent. ...THE UNIT CASING 1. Switch the printer off. 2. Wipe the unit surface with a soft cloth moistened sparingly with water or neutral detergent. 3. Use a soft dry cloth to dry the unit surface
  • Oki Pro6410 NeonColor | Users Guide - Page 69
    Do not use benzine, thinners or alcohol as a cleaning agent. 1. Remove items like a wrist watch or bracelet. 2. Switch the printer off. 3. Remove the paper tray from the printer. 4. Gaining access through the gap left by paper tray, wipe the paper feed rollers with a clean, lint-free cloth moistened
  • Oki Pro6410 NeonColor | Users Guide - Page 70
    of 256MB or 512MB, giving a maximum total memory capacity of 768MB. 1. Switch the printer off and disconnect the AC power cable. OI 2. Press the cover release and open the printer's top cover fully. WARNING! If the printer has been powered on recently, the fuser will be hot. This area is clearly
  • Oki Pro6410 NeonColor | Users Guide - Page 71
    to one end than the other. 8. Identify the RAM expansion slot in the printer. 9. If the RAM expansion slot already contains a memory upgrade board, that board expansion slot, and the small cutout is closer to the rear of the printer. 11. Gently push the board into the RAM expansion slot until it
  • Oki Pro6410 NeonColor | Users Guide - Page 72
    close the top cover, pressing down firmly at each side to latch it closed. 15. Reconnect the AC power cable and switch the printer on. 16. When the printer is ready, print a menu map as follows: (a) Press the Enter button. (b) Press the Menu down button then the Enter button to select the
  • Oki Pro6410 NeonColor | Users Guide - Page 73
    on desired location. 3. Observing safety rules for lifting and, using locating guides, place printer on top of the additional paper tray(s). 4. Re-connect the AC power cable and switch the printer ON. All that remains is to adjust the printer driver to make full use of the new features ("Setting the
  • Oki Pro6410 NeonColor | Users Guide - Page 74
    such as additional paper trays will only be usable if the printer driver on your computer knows they are there. In some cases hardware options appropriate to your machine and click OK. STORAGE CABINET Instructions for installing the Storage Cabinet are supplied with the cabinet. Installing upgrades
  • Oki Pro6410 NeonColor | Users Guide - Page 75
    TROUBLESHOOTING Provided that you follow the recommendations in this guide on the use of print media, and you keep the media in good condition prior to use, your printer should give years of reliable service. However, paper jams occasionally do occur, and this section explains how to clear them
  • Oki Pro6410 NeonColor | Users Guide - Page 76
    PAPER SENSOR ERROR CODES 382 381 380, 400 390 391 392 CODE # LOCATION 380 Paper feed 381 Paper path 382 Paper exit 390 MP Tray a. If fitted. CODE # 391 392 400 LOCATION Paper Tray 2nd Paper traya Paper size Troubleshooting > 76
  • Oki Pro6410 NeonColor | Users Guide - Page 77
    It can be removed from the rear later. 2. Press the cover release and open the printer's top cover fully. WARNING! If the printer has been powered on, the fuser will be hot. This area is clearly labelled. Do marking your furniture and to avoid damaging the green drum surface. Troubleshooting > 77
  • Oki Pro6410 NeonColor | Users Guide - Page 78
    touch it and do not expose it to normal room light for more than 5 minutes. If the Print Cartridge needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag to keep it away from light. Never expose the drum to direct sunlight
  • Oki Pro6410 NeonColor | Users Guide - Page 79
    7. Look into the printer to check whether any sheets of paper are visible on any part of the belt unit. c d b a CAUTION! Do not use any sharp or again. NOTE If the sheet is well advanced into the fuser (only a short length is still visible), do not attempt to pull it back. Troubleshooting > 79
  • Oki Pro6410 NeonColor | Users Guide - Page 80
    the rear of the printer to release the fuser. Withdraw the fuser unit using the handle (f). e f e (e) Press release lever (g) and pull the trapped paper from the fuser. g (f) Replace fuser unit into the machine and move locking levers (e) toward the rear of the machine. e Troubleshooting > 80
  • Oki Pro6410 NeonColor | Users Guide - Page 81
    complete assembly by its top centre, lower it into place in the printer, locating the pegs at each end into their slots in the sides of the printer cavity. 9. Lower the top cover but do not press down to rear exit tray, close it once any paper has been removed from this area. Troubleshooting > 81
  • Oki Pro6410 NeonColor | Users Guide - Page 82
    tray and ensure that all paper is stacked properly, is undamaged, and that the paper guides are properly positioned against the edges of the paper stack. When satisfied, replace the tray. System Adjust Menu, the printer will attempt to reprint any pages lost due to paper jams. Troubleshooting > 82
  • Oki Pro6410 NeonColor | Users Guide - Page 83
    SPECIFICATIONS Pro6410 - N31193A/N31193B ITEM Dimensions Weight Power supply Power consumption Operating environment Print environment Noise (Sound pressure level) SPECIFICATION 435 x 547 x 340mm (W x D x H) 26Kg approx. N31193A: 110
  • Oki Pro6410 NeonColor | Users Guide - Page 84
    , error codes 76 loading cassette trays ...... 15 loading letterhead 16 recommended types ......... 13 supported sheet sizes....... 13 Print cartridge how to replace 62 Printer collate 30 Printer overview 10 S Switching off correctly .......... 49 T Transfer media/film printing 39 U Upgrades
  • Oki Pro6410 NeonColor | Users Guide - Page 85
    :www.oki.pt E-mail : [email protected] Oki Service Serviço de apoio técnico ao Cliente Tel: 214 727 660 E-mail : [email protected] OKI Systems 66 65 00 Fax: +45 43 66 65 90 E-mail: [email protected] / [email protected] Website: www.oki.dk OKI Europe Limited, Sucursal en España Complejo Vega Norte. C/ Anabel Segura,
  • Oki Pro6410 NeonColor | Users Guide - Page 86
    (Sweden) AB Box 1193 164 26 Kista Tel. +46 (0) 8 634 37 00 e-mail: [email protected] Website: www.oki.se Oki Systems (Schweiz) Baslerstrasse 15 CH-4310 Rheinfelden Support deutsch +41 61 827 94 81 Support français +41 61 827 94 82 Support italiano +41 061 827 9473 Tel: +41 61 827 9494 Website: www
  • Oki Pro6410 NeonColor | Users Guide - Page 87
    4-11-22 Shibaura, Minato-ku,Tokyo 108-8551, Japan www.oki.com/printing/ March 2017 46225202EE Rev2
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
User’s Guide
Pro6410 NeonColor