Olympus 226260 Stylus 840 Instruction Manual (English) - Page 58
When you get an error message on the camera
UPC - 050332162570
View all Olympus 226260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
When you get an error message on the camera Getting to know your camera better 58 EN Monitor indication q CARD ERROR q WRITE PROTECT > MEMORY FULL q CARD FULL L NO PICTURE Possible cause There is a problem with the card. Corrective action This card cannot be used. Insert a new card. Writing to the card is prohibited. The internal memory has no available memory and cannot store any new data. The card has no available memory and cannot store any new data. The recorded image has been protected (read-only) on a computer. Download the image to a computer and cancel the readonly setting. Insert a card or erase unwanted data. Before erasing, backup the data of important pictures using the card, or download such pictures to a computer. Replace the card or erase unwanted data. Before erasing, download important pictures to a computer. There are no pictures in the The internal memory or the card contains internal memory or on the no pictures. card. Record pictures. r PICTURE ERROR r THE IMAGE CANNOT BE EDITED CARD-COVER OPEN g BATTERY EMPTY There is a problem with the selected picture and it cannot be played back on this camera. Pictures taken by other cameras take in [D], or previously edited or corrected pictures cannot be edited or fixed. The battery/card compartment cover is open. Use image processing software to view the picture on a computer. If that cannot be done, the image file is damaged. Use image processing software to edit the pictures. Close the battery/card compartment cover. The battery is empty. Charge the battery. CARD SETUP The card was not read. Or, the card is not formatted. CLEAN CARD FORMAT SET OK MEMORY SETUP IN There is an error in the internal memory. POWER OFF MEMORY FORMAT SET OK NO CONNECTION NO PAPER The camera is not connected to the computer or printer correctly. There is no paper in the printer. • Select [CLEAN CARD], and press e. Remove the card and wipe the contact area with a soft dry cloth. • Select [FORMAT] [YES] and press e. All data on the card is erased. Select [MEMORY FORMAT] [YES] and press e. All data in the internal memory is erased. Disconnect the camera and connect it again correctly. Load some paper in the printer.