Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 210

Troubleshooting The viewfinder display is not clear. Possible cause Corrective action The diopter is not adjusted properly. Adjust the diopter so that the AF target mark is clearly visible. Ref. Page P.38 The monitor is hard to see. Possible cause The brightness is not adjusted properly. The monitor is exposed to direct sunlight. Corrective action Select in the mode menu and adjust the brightness. Position the monitor in the down position or block the sunlight with your hand. Ref. Page P.180 - Pictures you have taken do not appear on the monitor. Possible cause Corrective action The power is off. Set the mode dial to power on. , then turn the The camera is in the shooting Press mode. dial to twice quickly, or set the mode . There are no pictures on the NO PICTURE appears on the monitor. card. Record pictures. There is a problem with the Refer to "Error codes". card. The camera is connected to a The monitor does not function when the AV TV. cable is connected to the camera. Ref. Page P.53 P.53, 54 - P.205 P.151 The date recorded with the image data is wrong. Possible cause Corrective action The date/time is not set. Set the date/time. The clock adjustment is not factory-preset. The batteries are exhausted. When the batteries run out, the date/time setting is canceled or becomes inaccurate. Replace the batteries with new ones and set the date/time again. The camera has been left with the batteries removed. If the camera is left for several hours with the batteries removed, the date/time setting is canceled. Set the date/time again. Ref. Page P.36 P.21, 36 P.21, 36 11 Miscellaneous 209