Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 34
If the card is not recognized (card check), Control panel, Monitor, indication, Corrective action
UPC - 050332138223
View all Olympus 5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Power on/off If the card is not recognized (card check) When the power is turned on, the camera checks the card automatically. If there is no card in the camera or a card that is not supported by this camera is inserted, the following screen is displayed. • All data stored on the card is erased when the card is formatted. Note 1 Getting started Control panel Monitor indication Corrective action There is no card in the camera or the card is not inserted properly. - - - NO CARD → Insert a card. If a card is already inserted, remove it and insert it again correctly. There is a problem with the card. → Use a different card. Insert a CARD ERROR new card. - E- The card cannot record, play back or erase pictures. Format the card or replace it with a new one. → Press to select POWER OFF, then press . Replace it CARD%SEtUP with a new one. POWER%OFF → Format the card. - F - FORMAt Press to select FORMAT, then press to SELECt GO display the confirmation screen. Select YES and press . Formatting starts. If the card was successfully formatted, the camera is ready to take pictures. 33