Olympus C 700 C-700 UZ Reference Manual (10.2 MB) - Page 70
Metering methods and Macro mode
UPC - 050332133938
View all Olympus C 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
(Macro/Spot) button Metering methods and Macro mode It is possible to select metering methods and focusing area. In the mode, exposure is based on the value metered in the center of the frame. In the mode, focusing is performed quickly in macro shooting. Each time you press the (macro/spot) button, the spot metering/macro mode changes as shown below. 3 Selections Display Functions OFF No display Digital ESP metering: Meters the center of (factory default the subject and the area around it. setting) Determined by metering within the AF target mark. Use this mode when backlight is making the subject darker. (Spot metering) Set the Zoom lever to the maximum "W" position, then move in close to the subject (no closer than 0.1m (0.3 ft)) so that you can fill the entire frame with your subject. (Digital ESP metering, Macro mode) Use this mode when you want to use Spot metering while shooting in the Macro mode. (Spot metering, Macro mode) Supported working range Mode Zoom "W" (max.) No Macro 0.6 m to ∞ (2.0 ft to ∞) Macro 0.1 m to 0.6 m (0.3 ft to 2.0 ft) Zoom "T" (max.) 2.0 m to ∞ (6.5 ft to ∞) 1.2 m to 2.0 m (3.9 ft to 6.5 ft) Mode dial & Functions Functions vary depending on the Mode dial setting. AUTO OFF (Digital ESP metering*) P A/S/M 70 OFF (Digital ESP metering*), (Spot metering, Macro mode) OFF (Digital ESP metering*) (Spot metering), (Macro mode), * factory default setting ~ Continued on next page