Olympus D435 D-435 Advanced Manual - Page 89
Troubleshooting, Error codes
UPC - 050332155107
View all Olympus D435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Troubleshooting Error codes Monitor indication Possible cause Corrective action q NO CARD The card is not inserted, or it cannot be recognized. Insert a card, or remove the card and insert it again correctly. If the problem persists, format the card. If the card cannot be formatted, use a new card. The internal memory can be used without inserting a card. There is a problem with This card cannot be used. Insert a q the card. new card. CARD ERROR q WRITE- PROTECT Writing to the card is prohibited. The recorded image has been protected (read-only) on a computer. Download the image to a computer and cancel the read-only setting. > MEMORY FULL There is no empty space in the internal memory, so it cannot record new data. Insert a card, copy the pictures to the card, or erase unwanted pictures. Before erasing, download important images to a computer. q CARD FULL No more print reservations, backups of the internal memory, or pictures can be stored on the card. Replace the card or erase unwanted pictures. Before erasing, download important images to a computer. L NO PICTURE There are no pictures in The internal memory or the card the internal memory or contain no pictures. Record the card. pictures. r There is a problem with Use image processing software to PICTURE the selected picture and view the picture on a computer. If it cannot be played back that cannot be done, the image file 8 ERROR on this camera. is damaged. The battery compartment/card CARD-COVER cover is open. Close the battery compartment/card cover. OPEN Y/M/D When the camera is used Set the date and time. for the first time or the battery has been removed for a long time, the date and time are on the factory default setting. CARD SETUP POWER OFF FORMAT SELECT GO This card cannot be used with this camera or the card is not formatted. • Format the card or replace. • Select [POWER OFF] and press i. Insert a new card. • Select [FORMAT] and press i. All data on the card is erased. Appendix 89