Olympus D540 D-540 Zoom Reference Manual (English - 5.2MB) - Page 126
The image quality is poor
UPC - 050332146280
View all Olympus D540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Troubleshooting The image quality is poor The picture is too bright. Possible cause The flash was set to the fill-in flash mode. The subject was excessively illuminated. Corrective action Select a flash mode other than fill-in flash. Adjust the exposure compensation toward minus (-) or change the camera position. Ref. Page P.56 P.69 The picture is too dark. Possible cause The flash was blocked by your finger. The subject was out of the working range of the flash. The flash was set to the flash off mode. The subject was too small and was backlit. The sequential shooting mode was used. Bright subjects such as snow will turn out darker than their natural colors in the image. Corrective action Hold the camera correctly, keeping your fingers away from the flash. Shoot within the flash working range. Select a flash mode other than flash off. Set the flash to fill-in mode. Higher shutter speeds are used when the sequential shooting mode is selected, which may result in pictures that are darker than usual. Select in the DRIVE menu. Adjust the exposure compensation toward +. Ref. Page P.30 P.56 P.56 P.56 P.63 P.69 The colors of pictures taken indoors look unnatural. 9 Possible cause Corrective action Ref. Page Indoor lighting can affect Set the white balance according to the lighting. the picture's colors. P.71 There is no white in the Include something white in the picture, or subject. shoot using the fill-in flash mode. P.56 The white balance setting is wrong. Adjust the white balance according to the light source. P.71 Miscellaneous 125