Olympus D540 D-540 Zoom Reference Manual (English - 5.2MB) - Page 25
If the card is not recognized (card check), Monitor, indication, Corrective action
UPC - 050332146280
View all Olympus D540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Power on/off If the card is not recognized (card check) When the power is turned on, the camera checks the card automatically. If there is no card in the camera or a card that is not supported by this camera is inserted, one of the following screens will be displayed. • All data stored on the card is erased when the card is formatted. Getting started 1 Note Monitor indication NO CARD Corrective action There is no card in the camera or the card is not inserted properly. → Insert a card. If a card is already inserted, remove it and insert it again correctly. The card cannot record, play back or erase pictures. Replace with a new card, or format the card. → Press to select POWER OFF, and press . Replace it with a new one. → Format the card. Press to select FORMAT, and press to display the confirmation screen. Select YES and press . Formatting starts. If the card was successfully formatted, the camera is ready to take pictures. 24