Olympus DS-40 DS-40 Instructions (English) - Page 29
Press the, button to start, recording., button, adjust the pause sound level.
UPC - 050332159297
View all Olympus DS-40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Using the Variable Control Voice Actuator (VCVA) 7 Press the REC button to start recording. When the sound volume is lower than the preset threshold sound level, recording automatically 7 stops after 1 sec approximately, and "Standby" flashes on the display. The record/play indicator light glows red when recording starts and flashes when recording pauses. 2 8 Press the 9 or 0 button adjust the pause sound level. The VCVA level can be set to any of 15 different values. The higher the value, the more sensitive the recorder to sounds. At the 8 highest value, even the faintest sound will activate recording. The VCVA pause sound level can be adjusted according to the ambient (background) noise. b Level meter (varies according to the sound volume being recorded) c Start level (moves to the right/left according to the set level) Using the Variable Control Voice Actuator ...Notes • The start/stop actuation level also varies depending on the selected microphone sensitivity mode (☞ P31). • If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the recording situation. • To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended. 29