Olympus E-600 E-600 Instruction Manual (English) - Page 104

Z K UTILITY PIXEL MAPPING CLEANING MODE gP. 123 gP. 123 EXT. WB DETECT You can disable the white balance sensor used to determine the light source during auto white balance. This is useful when the light source near the sensor and the light source illuminating the subject are different. AF FOCUS ADJ. You can use the AF sensor to fine-adjust the focusing position to a range of ±20 steps (-: closer, +: toward )). Normally, there is no need to change this. [SET AF DATA] Fine-adjust the AF default value and register the setting. You can also register the setting according to the lens. [OFF] AF focus adjustment is not performed. [DEFAULT DATA] Registers and applies all lens AF adjustment values not registered LENS DATA SET individually. [LENS DATA] Fine-adjusts the AF for each lens. You register the adjustment values for up to 20 lenses. No.1 14-42 F3.5-5.6 S/N 000000000 EC00 S/N 888888888 +20 T ±88 W ±88 CANCEL SET Use fg to adjust. 8 x Notes • Depending on the adjustment made, the lens may not focus toward the ) or near side. • When using a teleconverter, the teleconverter and lens are registered as a set. • Only Four Thirds lenses can be registered. Customizing your camera [DATA LIST] This displays the lens information registered with [LENS DATA] from [SET AF DATA]. Select a lens from the list, and then check, delete, or edit the registration information. 104 EN When the same lens is registered multiple times, the adjustment value for the lens with v is applied. DATA LIST 1 14-42 F3.5-5.6 2 14-42 F3.5-5.6 1 12-60 F2.8-4.0 2 12-60 F2.8-4.0 1 50-200 F2.8-3.5 BACK SET Select this to check, delete, or edit the selected lens. Select which lens to use when the same lens is registered multiple times.