Olympus Li-50B Stylus 1030 SW Instruction Manual (English) - Page 28

Movie ([UNDERWATER MOVIE]) Q R S Under water 1 Under water 2 Under water 3 Adjusts the color balance to be suitable for under water shooting. ISO Changing the ISO sensitivity AUTO 80/100/200/400/ 800/1600 Sensitivity is automatically adjusted according to the conditions of the subject. A low value lowers the sensitivity for daylight shooting of clear, sharp pictures. The higher the value, the better the camera's light sensitivity and ability to shoot with a fast shutter speed and in low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. DRIVE Using sequential (continuous) shooting o Shoots 1 frame at a time when the shutter button is pressed. j Focus and exposure are locked at the first frame. The sequential shooting speed varies depending on the image quality setting. W Pictures can be taken at a faster speed than normal sequential shooting. You can take a sequence of pictures at one time by holding down the shutter button. The camera will take pictures continuously until you release the shutter button. • When [W] is selected, the following setting restrictions apply: • The flash mode is fixed at [$]. • [ISO] is fixed at [AUTO]. • [IMAGE SIZE] is limited to [I] and lower. • [FINE ZOOM], [DIGITAL ZOOM] and [R] are not available. FINE ZOOM Zooming in on your subject without reducing image quality OFF / ON This function allows you to zoom up to 21× by combining the optical zoom and image cropping. This function will not reduce the image quality since it dose not convert the data with fewer pixels into the data with larger pixels. • The available zoom factor varies depending on the [IMAGE QUALITY] setting. • [IMAGE SIZE] is limited to [H] and lower. DIGITAL ZOOM Zooming in on your subject OFF / ON The digital zoom can be used to take close-up shots with stronger magnification when combined with optical zoom. (Optical Zoom × Digital Zoom: maximum 18×) • This function cannot be set when [FINE ZOOM] is [ON]. Menu operations 28 EN