Olympus SP 700 SP-700 Advanced Manual (English) - Page 149

Troubleshooting, See Error messages. - zoom error

Page 149 highlights

Troubleshooting Troubleshooting (Preparatory operations Possible cause Corrective action The camera does not turn on or function buttons do not respond. The power is off. Press the o button to turn the camera on. The battery power is exhausted. Charge or change the battery. The battery is temporarily Warm the battery by putting it in your pocket unable to function for a while. because of the cold. The camera is in the sleep mode. Press the shutter button or turn the zoom lever. The camera is connected The camera will not operate while it is to a computer. connected to a computer. Ref. page P. 9 - - - P. 141 (Taking pictures Possible cause Corrective action Ref. page No picture is taken when the shutter button is pressed. The battery power is exhausted. The camera is in the playback mode. Charge or change the battery. - Set the mode switch to the K or A position P. 9 to enable a shooting mode. The flash has not finished charging. The power is off. Remove your finger from the shutter button, and wait until the # (flash charge) mark stops blinking before taking the picture. Set the mode switch to K or n, and press o. P. 44 P. 10 The internal memory or card is full. Insert a new card or erase unwanted pictures. Before erasing, download important pictures to a computer. P. 93, 140 The battery ran out of Charge the battery. (Wait until the power/ power during shooting or card access lamp turns off when blinking.) - 9 while the images were being written to the internal memory or the card. The memory gauge is Wait until there is space in the memory - full. gauge. There is a problem with See "Error messages". the card. P. 147 149 Appendix

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187

Troubleshooting
149
9
Appendix
(
Preparatory operations
(
Taking pictures
Troubleshooting
Possible cause
Corrective action
Ref.
page
The camera does not turn on or function buttons do not respond.
The power is off.
Press the
o
button to turn the camera
on.
P. 9
The battery power is
exhausted.
Charge or change the battery.
The battery is temporarily
unable to function
because of the cold.
Warm the battery by putting it in your pocket
for a while.
The camera is in the
sleep mode.
Press the shutter button or turn the zoom
lever.
The camera is connected
to a computer.
The camera will not operate while it is
connected to a computer.
P. 141
Possible cause
Corrective action
Ref.
page
No picture is taken when the shutter button is pressed.
The battery power is
exhausted.
Charge or change the battery.
The camera is in the
playback mode.
Set the mode switch to the
K
or
A
position
to enable a shooting mode.
P. 9
The flash has not
finished charging.
Remove your finger from the shutter button,
and wait until the
#
(flash charge) mark
stops blinking before taking the picture.
P. 44
The power is off.
Set the mode switch to
K
or
n
, and press
o
.
P. 10
The internal memory or
card is full.
Insert a new card or erase unwanted
pictures. Before erasing, download important
pictures to a computer.
P. 93,
140
The battery ran out of
power during shooting or
while the images were
being written to the internal
memory or the card.
Charge the battery. (Wait until the power/
card access lamp turns off when blinking.)
The memory gauge is
full.
Wait until there is space in the memory
gauge.
There is a problem with
the card.
See “Error messages”.
P. 147