Olympus Stylus Verve Stylus Verve Advanced Manual (English) - Page 138

Operational Sequence You can transfer images from the card in the camera to your computer by connecting the camera to the computer with the supplied USB cable. Installing OLYMPUS Master gP.140 Connecting the camera to computer using supplied USB cable gP.146 Activating OLYMPUS Master gP.148 Saving pictures on computer gP.150 Disconnecting the camera from your computer gP.151 Use of the AC adapter and power coupler (sold separately) is recommended when using the camera with a computer. When using the battery for the camera connected to a computer, be sure that the battery has sufficient power. Note that the camera's battery will continuously discharge (use energy) when connected 5 (communicating) with a computer. If the battery power is exhausted, the camera will stop operating and the computer may malfunction and the image data (files) being transferred may be lost. Do not turn the camera off when the camera is connected with a computer, doing so may cause a malfunction. If the camera is connected to a computer via a USB hub, reliable operation cannot be guaranteed. If a malfunction should occur, connect the camera directly to the computer without using the USB hub. Utilizing the images imported in a computer Î Be sure to copy the images to the computer before editing the images using graphic software. Depending on the application software used, editing images (such as rotating) on the picture card may cause damage to the file data on the card. If the image data cannot be transferred from the card in the camera connected using the USB cable Î Use an xD-Picture Card adapter (sold separately) depending the operating system for transferring the image data from the xD-Picture card to a computer. For details, refer to Olympus homepage. Connecting Computer 138