Olympus VN-801PC VN-801PC Instructions (English) - Page 7
Playback through earphone, Setting an index mark or a temp mark, Changing play speed - review
View all Olympus VN-801PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
h Changing play speed The playback speed of the file can be changed between 0.5 and 2 times speed. Change the speed according to need such as listening to meeting content at a fast speed or reviewing spots that you couldn't catch in a language lesson at a slow speed. 1 Press the `OK/MENU button to start playback. 2 While the recorder is during playback mode, press the `OK/MENU button to open the playback speed adjustment display. 3 Press the + or − button to adjust the playback speed. • [x1.0 Play] (Normal playback) Playback at normal speed. 3 [x0.5 Play] - [x0.9 Play] (Slow playback) Playback speed slows down. [x1.1 Play] - [x2.0 Play] (Fast playback) Playback speed becomes faster. 4 Press the `OK/MENU button to complete the setting. • If you leave the recorder for 3 seconds, the setting will be applied and the recorder will return back to the original screen. Even if playback is stopped, the changed playback speed will be retained. The next playback will be at that speed. Note: • As in normal playback mode, you can stop playback, cue a file, or insert an index mark in slow playback and fast playback modes as well. h Playback through earphone To EAR jack An earphone can be connected to the EAR jack of the recorder for listening. • When the earphone is used, the recorder speaker will be switched-off. Notes: • To avoid irritation to the ear, insert the earphone after turning down the volume level. • When you listen with the earphone during playback, do not raise the volume too much. It may cause hearing impairment and decrease in hearing ability. h Setting an index mark or a temp mark If index marks and temp marks are placed, you can quickly find a location you want to listen to in fast forward and fast rewind and when cuing a file. Index marks cannot be placed on files created on machines other than this recorder, but temp marks can be placed instead to temporarily remember desired locations. Temp marks are temporary markings. They will be automatically erased if you move to another file or connect the recorder to a computer. 1 While the recorder is during recording mode or playback mode, press the FOLDER/INDEX/SCENE button. • Even after an index or temp mark is placed, recording or playback will continue so you can place index or temp marks in other locations in a similar manner. Clearing an index mark or a temp mark: 1 Locate the index or temp mark you want to clear. -7-