Olympus WS560M Instruction Manual - Page 15
Setting time and date, Time & Date]
View all Olympus WS560M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HOLD/Setting time and date [Time & Date] • If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state unchanged (When playback has ended and the recording has ended due to the remaining memory being used up, it will stop). 1 Press the 9 or 0 button to select the item to set. • Select the item from the "hour", "minute", "year", "month" and "day" with a flashing point. Setting time and date [Time & Date] If you set the time and date beforehand, the information when the file is recorded is automatically stored for each file. Setting the time and date beforehand enables easier file management. When you use the recorder for the first time after purchasing it, or when the batteries have been inserted without the device having been used in a long time, the [Set Time & Date] will appear. When the "hour" is flashing, conduct the setup from Step 1. 1 HOLD/Setting time and date 2 Press the + or − button to set. • Follow the same steps by pressing the 9 or 0 button to select the next item, and press the + or − button to set. • You can select between 12 and 24 hour display by pressing the LIST button while setting the hour and minute. Example: 10:38 P.M 10:38 PM (Initial setting) 22:38 • You can select the order of the "month", "day" and "year" by pressing the LIST button while setting them. Example: April 15, 2009 4M 15D 2009Y (Initial setting) 15D 4M 2009Y LIST button +− button 9 0 button OK ` button 2009Y 4M 15D 3 Press the OK ` button to complete the setting. 15