Onkyo CR-325 Owner Manual - Page 53
Use the Previous and Next, Press the [STANDBY/ON] button
View all Onkyo CR-325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Using the Timers-Continued 7 If you selected "Once", use the 11 Previous and Next []/[] buttons to select the day, and then press [ENTER]. You can select: SUN, MON, TUE, WED, THU, FRI, or SAT. Go to step 10. Use the Previous and Next []/ [] buttons to specify the Off time, and then press [ENTER]. 8 If you selected "Every", use the Previous and Next []/[] 12 If you selected "Play" in step 2, use the Previous and Next []/ buttons to select the day, "Every- [] buttons to specify the CD day", or "Days Set", and then receiver's volume level, and then press [ENTER]. press [ENTER]. You can select the following: MON TUE WED THU FRI SUN Days Set Everyday SAT 9 If you selected "Days Set", use the Previous and Next []/[] buttons to select the first day, and then press [ENTER]. The default setting is 10. If you want to use your normal volume level setting for the timer, press the Previous [] button repeatedly until "TimerVol.Off" appears on the display. In this case, the timer will use the volume level that was set before the CD receiver was set to Standby. Use the Previous and Next []/ [] buttons again to select the last day, and then press [ENTER]. 13 CD receiver Timer indicator 1, 2, 3, or 4 will stop flashing and light up. TIMER indicator Remote controller Underscore indicates timer programmed for recording Number of programmed timer You can select only consecutive days. Press the [STANDBY/ON] button 10 Use the Previous and Next []/ [] buttons to specify the On time, and then press [ENTER]. to set the CD receiver to Standby. Notes: • Be sure to set the CD receiver to Standby, otherwise the timed opera- tion will not work. • While a timed operation is in progress, You can also use the remote controller's number buttons to enter the time. For example, to enter 7:29, press [7], [2], and you can cancel it by pressing the [TIMER] or [SLEEP] button. • While timed recording is in progress, the output of the CD receiver is muted. [9]. To hear what's being recorded, press Notes: • Once the On time is set, the Off time is automatically set to one hour later. • To ensure that the first few seconds of the [MUTING] button. Press it again to mute the CD receiver. • Memory, random, and 1-Folder playback cannot be used with the timers. a program are recorded when using timer recording, set the On time slightly ahead of the program's start time (about 1 minute). To return to step 1 and start timer programming all over again, press the [MENU/NO] button at any point in this procedure. 53