Onkyo TX-NR545 Basics Guide - Page 13

3 Remote Mode Setup Initial Setup Remote Mode Setup ɹPreprograming remote will give you control ɹof other devices from AV receiver remote. ɹWould you like to setup your remote to ɹcontrol your devices? This may take a while ɹdepending on what and how many you have ɹconnected. You can always come back to remote ɹsetup from setup "7-2 Remote Mode". ɹYes, Continue ɹNo, Skip SETUP Exit You can enable operation of the other components using the remote controller of the unit. When the Remote Mode Setup start screen is displayed, select "Yes, Continue" with the cursors and press ENTER on the remote controller. Follow the guidance to select the desired REMOTE MODE button and in the keyboard screen, enter the first three characters of the brand name of the device you are going to program and search for the remote control code. The guidance will also explain how to set the remote controller. 4 Network Connection Initial Setup Network Connection ɹDo you want to connect network connection? ɹIt gives you network services that our AV ɹreceiver support. If you wish to skip this step. ɹselect "No. Skip". ɹYes ɹNo, Skip SETUP Exit You can check the network connection and make the Wi‑Fi setting. When the Network Connection start screen is displayed, select "Yes" with the cursors and press ENTER on the remote controller. If you select "Wired" in the next screen, you can view the LAN cable connection status. To make the Wi-Fi setting, select "Wireless", press ENTER on the remote controller and follow the sections below. Make the following preparations. Wi-Fi connection requires an access point such as wireless LAN router (). Write down the SSID and password (key) of the access point if they are shown in the label of the main body. If the access point has an automatic setting button (may be called differently according to the manufacturer), you can set up without inputting the password. For how to use the automatic setting button of the access point, refer to its instruction manual. ¼¼The unit supports Wi-Fi connection with 2.4 GHz access point. 1. Select the method of Wi-Fi connection with the cursors and press ENTER. Scan Networks: Use this unit to search for and connect to a wireless LAN router or other access point. Use iOS Device (iOS7 or later): Select this method to let this unit share the Wi-Fi settings with your iOS device and establish a Wi-Fi connection with ease. (The device must be compatible with iOS version 7 or later.)  If you selected "Scan Networks" 2. Select the SSID of the access point to be connected with the cursor buttons and press ENTER. When the SSID of the access point appears on the TV screen, select the desired access point. ●● If you changed the initial setting of the access point to skip password entry, step 3 is unnecessary. ●● If you changed the initial setting of the access point to hide the SSID, see "When the access point is not displayed". 3. Select and set the authentication method. The "Enter Password" screen may be displayed automatically if the wireless LAN router does not have an automatic setting button. Step 2: Initial Setup Button" and "PIN code". See below for details of and how to set each method. Enter Password: Enter the password of the access point to establish connection. 1 Select "Enter Password" with the cursor buttons and press ENTER. 2 Enter the password () on the keyboard screen, select "OK" with the cursor buttons and press ENTER. ¼¼Select "A/a" and press ENTER to toggle between upper and lower case. Select "" or "" and press ENTER to move the cursor to the selected direction. Select and press ENTER to delete the character at the left of the cursor position. To select whether to mask the password with "" or display it in plain text, press D on the remote control. Press +10 on the remote controller to switch between upper and lower case. Press CLR to delete all the input characters. 3 If the security method of the access point to be connected is WEP, select "Default Key ID", select "OK" and press ENTER. Push Button: Use the automatic setting button of the access point to establish connection. 1 Select "Push Button" with the cursor buttons and press ENTER. 2 Hold down the automatic setting button of the access point for the necessary seconds, select "OK" with the cursor buttons and press ENTER. PIN code: Select this method when the automatic setting button of the access point is beyond the reach. Select "PIN code" with the cursor buttons and press ENTER to display the 8-digit PIN code. Register the displayed PIN code to the access point, select "OK" with the cursor buttons and press ENTER. For how to register the PIN code to the access point, refer to its instruction manual. Wi-Fi Setup Select the authentication method. Enter Password Push Button PIN code When this screen is displayed, select and set one of the three authentication methods: "Enter Password", "Push En-13