Onkyo TX-RZ3100 AV Receiver Owners Manual - English - Page 18
Zone 2 Pre/line Out, Zone 2 Speaker
View all Onkyo TX-RZ3100 AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
> Before start > Hookup > Setup > Playback > Part Names ᴧ 1 ˎ Depending on the combination of speakers, you may need to connect to other jacks. See "Points to note with speaker combinations" (ÄP8) for details. 1 Analog audio cable, 2 Speaker cable 18 MAIN ROOM ZONE2 2 LINE IN ZONE 2 SPEAKER ZONE 2 PRE/LINE OUT ZONE 2 PRE/LINE OUT / ZONE 2 SPEAKER You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). Connections with an AV component Connect with HDMI IN 1 to 5 if you want to output an external AV component to ZONE 2. If the AV component doesn't have an HDMI jack, connect using a digital optical cable, digital coaxial cable, or analog audio cable. ZONE 2 PRE/LINE OUT It is possible to play 2 ch sources in a separate room while sources with a maximum of 11.1 ch are being played in the main room. Connect the ZONE 2 PRE/LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or the power amplifier in a separate room with an analog audio cable. ZONE 2 SPEAKER It is possible to connect speakers in a separate room and play 2 ch sources. 0 You can play through a maximum of 9.1 channels in the main room during ZONE 2 playback. Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (ÄP22) to enjoy this feature. 0 The audio from externally connected AV components can only be played in ZONE 2 when the audio is analog or 2ch PCM audio. If you have connected to this unit with an HDMI cable or digital optical/coaxial cable, may be necessary to convert the audio output of the AV component to PCM output.