Onkyo TX-RZ3100 AV Receiver Owners Manual - English - Page 19

> Before start > Hookup > Setup > Playback > Part Names 1 BD/DVD ˎ Depending on the combination of speakers, you may need to connect to other jacks. See "Points to note with speaker combinations" (ÄP8) for details. 1 Analog audio cable, 2 Speaker cable ᴧ 2 LINE IN MAIN ROOM ZONE3 ZONE 3 PRE/LINE OUT / ZONE 3 SPEAKER Along with the main room and ZONE 2, you can also enjoy audio in yet another room (ZONE 3). Connections with an AV component To output the audio of an external AV component to ZONE 3, connect using an analog audio cable. Output to ZONE 3 is not possible when you connect with an HDMI cable or digital optical/coaxial cable. ZONE 3 PRE/LINE OUT It is possible to play 2 ch sources in a separate room while sources with a maximum of 11.1 ch are being played in the main room. Connect the ZONE 3 PRE/LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or the power amplifier in a separate room with an analog audio cable. ZONE 3 SPEAKER It is possible to connect speakers in a separate room and play 2 ch sources. 0 You can play through a maximum of 7.1 channels in the main room during ZONE 3 playback. Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (ÄP22) to enjoy this feature. ZONE 3 SPEAKER ZONE 3 PRE/LINE OUT 19