Optoma EP773 User Manual - Page 37
Ceiling Mount Installation
View all Optoma EP773 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Appendices Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceiling mount package for installation. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projector meet the following specifications: Please note that damage resulting from incorrect installation will invalidate the warranty. Screw type: M3 Maximum screw length: 10mm Minimum screw length: 7.5mm 79.50 1.00 82.00 47.00 124.29 246.2 Warning: 1. If you buy the ceiling mount from another manufacturer, please ensure that there is at least 10cm distance between the bottom cover of the projector and the ceiling. 2. Avoid placing the projector near sources of heat such as airconditioning units and heaters otherwise it may overheat and shut down automatically. 347.3 67.08 15.6 Max. / Min. 204.50/ 254.50 53.33 94.7 37 English