Optoma HD-3000 User Manual - Page 45

HD3000 User's Guide Professional Video Scaler and Color Management System Edge Enhancement There are 5 pre-set modes and one user mode for advanced edge enhancement filter. You can easily switch between the modes to achieve different effects. 1. Use "h", "i" arrow keys to select the "Edge Enhancement" adjustment item, and then press "Enter" key or "g" key to enter this adjustment item. The Menu disappears and a small adjustment bar is shown (as shown below). I IMAGE ADVANCED IMAGE DISPLAY SYSTEM SETUP Noise Reduction Gamma Color Temp Image Mode Edge Enhancement Color Vividness B/W Extension Demo Reset Select Enter Enter 0 1 Warm Film Off Off Off Off Back Menu 2. Use "f", "g" arrow keys to select default modes. 3. For User mode adjustment, put cursor on "User", and then press "Enter" key to enter this adjustment item. The Menu disappears and a sub adjustment menu is shown (as shown below). Edge Enhancement Off 1 2 3 4 5 User 4. Use "h", "i" arrow keys to select and choose "Edge enhancement" bar, and then press "f", "g" arrow keys to adjust different enhancements. 5. User can select and setup different settings for each mode (1 to 5) in "User" option and adjust submenu shows as the following: When user chooses one mode and presses "Enter" to see the original settings of each item; user may then adjust the value per the original setting of each mode. HD3000 User's Guide 45