Optoma TX779P-3D User's Manual - Page 40
Setup | Network
View all Optoma TX779P-3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
User Controls Setup | Network Network v Use straight-thru cable when connecting to a hub, switch or a router. v Use crossover cable for direct PC to projector connection. Press Enter to apply Network settings. If the connection is successful, the OSD display will show the following dialogue box. 4 Network State-to display network information. 4DHCP: On: Assign an IP address to the projector from the DHCP server automatically. Off: Assign an IP address manually. 4 IP Address-Select an IP address 4Subnet Mask-Select subnet mask number. 4Gateway-Select the default gateway of the network connected to the projector. 4DNS-Select DNS number. 4Apply-Press Enter to apply the selection. English 40
English
³0
User Controls
Setup | Network
Network
Press
Enter to apply Network settings. If the connection is successful,
the OSD display will show the following dialogue box.
4
Network State—to display network information.
4
DHCP:
On: Assign an IP address to the projector from the DHCP server
automatically.
Off: Assign an IP address manually.
4
IP Address—Select an IP address
4
Subnet Mask—Select subnet mask number.
4
Gateway—Select the default gateway of the network connected to the
projector.
4
DNS—Select DNS number.
4
Apply—Press
Enter to apply the selection.
v
Use
straight-thru
cable when
connecting to
a hub, switch
or a router.
v
Use crossover
cable for direct
PC to projector
connection.