Optoma W351 Manual
Optoma W351 Manual
 |
View all Optoma W351 manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma W351 manual content summary:
- Optoma W351 | Manual - Page 1
| Advanced 47 OPTIONS 48 OPTIONS | Remote Settings 50 OPTIONS | Advanced 51 OPTIONS | Lamp Settings 52 OPTIONS | Optional Filter Settings.... 53 Appendices 54 Troubleshooting 54 Replacing the Lamp 60 Installing and Cleaning the Filter.......62 Compatibility Modes 63 Computer/Video/HDMI/Mac - Optoma W351 | Manual - Page 2
of important operating and maintenance (servicing) instructions in the literature accompanying the appliance projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma W351 | Manual - Page 3
in this user's guide. ▀■ Warning- Do not look into the projector's lens when the lamp is on. The instructions as described on pages 60-61. ▀■ Warning- This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. ▀■ Warning- Reset the "Lamp - Optoma W351 | Manual - Page 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Avoid using in - Optoma W351 | Manual - Page 5
. Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀■ In order to minimize the lamp power, use room blinds to reduce ambient light levels. Product Features ™™ Product - Optoma W351 | Manual - Page 6
customer service center. Projector Due to different applications in each Country, some regions may have different accessories. Battery Documentation : (*) Selected accessories may not be included in the package - varies by regional offerings and model specs. User's Manual - Optoma W351 | Manual - Page 7
Unit Standard Short Throw 10 12 14 9 3 5 6 1 13 2 4 5 9 8 8 7 7 6 The interface is subject to model's specifications. Do not block projector in/out air vents. 1. Focus Ring 2. Zoom Lever 3. IR Receiver 4. Control Panel 5. Input / Output Connec- tions 6. KensingtonTM Lock - Optoma W351 | Manual - Page 8
Introduction Control Panel 12 34 11 5 10 98 1. Source 2. Keystone Correction 3. Enter 4. Re-Sync 5. Help 6. Four Directional Select Keys 7. Temp LED 8. Power 9. On/Standby LED 10. Lamp LED 11. Menu 6 7 English 8 - Optoma W351 | Manual - Page 9
-through Output) ™™ Monitor loop 4. VGA2-IN/YPbPr Connector through only support in VGA2-IN/ YPbPr. 5. (PC Analog Signal/Component Video Input/HDTV ) ry. Please contact 9. Audio Output Connector (3.5mm mini jack) Optoma service for details. 10. Audio1 Input Connector (3.5mm mini jack) 11. RS - Optoma W351 | Manual - Page 10
Introduction Remote Control The interface is 1 subject to model's specifications. 2 3 4 5 6 7 8 9 10 11 12 13 14 Power Switch Freeze L R Enter Page- Laser Page+ Keystone Volume 1 4 HDMI 7 User1 Source 2 Menu 5 VGA 8 User2 0 3 3D 6 Video 9 User3 Resync 15 1. Power On/Off - Optoma W351 | Manual - Page 11
Installation Connecting the Projector Connect to Computer/Notebook Monitor Output Audio Output 2 3 4 VGA1-IN/YPbPr/ VGA2-IN/YPbPr S-VIDEO VGA-OUT VIDEO 1 5 HDMI RS-232C AUDIO1-IN RJ-45 - Optoma W351 | Manual - Page 12
Installation Connect to Video Sources Composite Video Output S-Video Output DVD Player, Set-top Box, HDTV receiver 1 2 S-VIDEO VGA-OUT VGA2-IN/YPbPr VGA1-IN/YPbPr/ 3 4 HDMI RS-232C AUDIO1-IN RJ-45 AUDIO-OUT AUDIO2-IN VIDEO USB Due to the difference in applications for each country, - Optoma W351 | Manual - Page 13
1. Securely connect the power cord and signal cable. When connected, the POWER LED will turn red. 2. Turn on the lamp by pressing " " button either on the top of When Power mode the projector or on the remote. The POWER LED will now (Standby) is set to Eco ( - Optoma W351 | Manual - Page 14
Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the "LAMP" LED indicator is lit red and if "On/Standby" indica- nearest service tor flashes red. center if the projector displays these symptoms. See pages 71-72 for more "TEMP - Optoma W351 | Manual - Page 15
for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring - Optoma W351 | Manual - Page 16
will focus at distances from 3.28 to 32.8 feet (1.0 to 10.0 meters). XGA with 0.6 TR: The projector will focus at distances from 2.5 to 12 feet (0.76 to 3.66 meters). WXGA with 0.5 TR: The projector will focus at distances from 1.64 to 11 feet (0.5 to 3.35 meters). Zoom Lever Focus Ring English - Optoma W351 | Manual - Page 17
Installation Adjusting Projection Image Size XGA series: Projection Image Size from 27.5"~ 302.8" (0.70 to 7.69 meters). WXGA series: Projection Image Size from 27.3" to 299.5" (0.69 to 7.60 meters). XGA with 0.6 TR: Projection Image Size from 60.7"~291.7", up to 300" (1.55 ~ 7.42 meters). - Optoma W351 | Manual - Page 18
Installation Standard XGA Diagonal length (inch) size of 4:3 Screen 30.00 40.00 60.00 70.00 80.00 90.00 100.00 120.00 150.00 180.00 250.00 300.00 Screen Size W x H (m) (inch) Width Height Width Height 0.61 0.46 24.00 18.00 0.81 0.61 32.00 24.00 1.22 0.91 48.00 36.00 1.42 1.07 56.00 42 - Optoma W351 | Manual - Page 19
Installation Short Throw XGA Diagonal length (inch) size of 4:3 Screen 32.00 40.00 60.00 70.00 80.00 90.00 100.00 120.00 150.00 180.00 250.00 300.00 Screen Size W x H (m) (inch) Width Height Width Height 0.65 0.49 25.59 19.29 0.81 0.61 32.00 24.00 1.22 0.91 48.00 36.00 1.42 1.07 56.00 - Optoma W351 | Manual - Page 20
OSD menu is not shown). Use to select items or make adjust- ments to your selection. Use to adjust image distortion caused by tilting the projector. (±40 degrees) Indicate the projector's lamp status. Temp LED Indicate the projector's temperature status. ON/STANDBY LED Indicate the - Optoma W351 | Manual - Page 21
emit laser (For Laser version). Page Up/Down for emulation of USB keyboard via USB when OSD off. Adjust image distortion caused by tilting the projector. Adjust to increase / decrease the volume. Use this function to choose your desired aspect ratio. Press "Menu" to launch the on-screen display (OSD - Optoma W351 | Manual - Page 22
User defined keys (1/2/3) Source Brightness Mode Re-Sync Press "Video" to choose Composite Video and S-video source. Keys can be defined in projector OSD. Press "Source" to select an input signal. Change the brightness mode: Bright->Eco>Dynamic->Eco+. (refer to page 52) Automatically synchronizes - Optoma W351 | Manual - Page 23
User Controls key position key legend Key MTX repeat format NEC_CODE custom code Data Byte 1 Byte 2 Byte 3 Byte 4 K27 1 Power F1 32 CD 81 7E K25 2 Switch F1 32 CD 3E C1 K28 3 Display blank&Audio mute F1 32 CD 8A 75 K31 4 Freeze F1 32 CD 8B 74 K26 5 - Optoma W351 | Manual - Page 24
type recommended by the manufacturer. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. • Do not mix batteries of different types. Different types of batteries have different characteristics. • Do not mix old and new batteries - Optoma W351 | Manual - Page 25
User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the "?" button on the control panel to open the Help Menu. 25 English - Optoma W351 | Manual - Page 26
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 54-59 for more details. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. English 26 - Optoma W351 | Manual - Page 27
User Controls 27 English - Optoma W351 | Manual - Page 28
you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press or "Enter - Optoma W351 | Manual - Page 29
#3 4:3 / 16:9 / Native / AUTO #4 4:3 / 16:9 or 16:10 / LBX / Native / AUTO 0~10 -5~25 (80%~200%) -100~100 -100~100 -40~40 Off / DLP-Link 3D / L / R AUTO / SBS / Top and Bottom / Frame Sequential On / Off English / Deutsch / Français / Italiano / Español / Português / Svenska / Nederlands / Norsk - Optoma W351 | Manual - Page 30
Sleep Timer (min) Power Mode (Standby) Lamp Hours Lamp Reminder Brightness Mode Lamp Reset Exit Optional Filter Installed Filter Usage Hours selected and the projector model you are using. (#1) "Color" and "Tint" are only supported in Video mode. (#2) "Signal" is only supported in Analog VGA - Optoma W351 | Manual - Page 31
User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Movie: For home theater. sRGB: Standardised accurate color. Blackboard: This mode should - Optoma W351 | Manual - Page 32
User Controls "Color" and "Tint" functions are only supported under Video mode. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video - Optoma W351 | Manual - Page 33
User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. Standard: for PC or computer source. BrilliantColor™ - Optoma W351 | Manual - Page 34
User Controls R ed/Green/Blue/Cyan/Magenta/Yellow: Use or to select Hue, Saturation and Gain Colors. W hite: Use or to select Red, Green and Blue Colors. R eset: Choose "Yes" to return the factory default settings for color adjustments. (*) Only available while HDMI input source is - Optoma W351 | Manual - Page 35
, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchronize the signal timing of the display with the graphic card. If the image - Optoma W351 | Manual - Page 36
User Controls DISPLAY English 36 Format Use this function to choose your desired aspect ratio. XGA 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. Native: This format displays the original image without - Optoma W351 | Manual - Page 37
User Controls Aspect ratio (source detected) 4:3 16:9 Native Resize image (SVGA) Resize image (XGA) 800 x 600 center 1024 x 768 center 800 x 450 center 1024 x 576 center No resize image, 1:1 mapping and centered. This format shows the original image without scaling. 16:9 or 16:10 depend - Optoma W351 | Manual - Page 38
User Controls 16:10 Screen 4:3 16:10 Native 480i/p 576i/p 1:1 mapping centered. 1080i/p 720p 1066 x 800 center 1280 x 800 center 1:1 mapping (960 x 540) display 1280 x 800 1280 x 720 center PC 1:1 mapping centered. Each I/O has different setting of "Edge Mask". "Edge Mask" and "Zoom" - Optoma W351 | Manual - Page 39
Sync Invert" is only available when 3D is enabled and this mode 3D is for DLP link glass only. Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing. See page 64 for supported 3D formats. 3D Mode O ff: Select "Off" to turn 3D settings off for 3D - Optoma W351 | Manual - Page 40
User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press "Enter" to finalize the selection. Projection Rear-Desktop and Rear-Ceiling are to be used with a translucent screen. Front-Desktop This - Optoma W351 | Manual - Page 41
the menu location on the display screen. Screen Type Choose the screen type from16:10 or 16:9. Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by RS232. Refer to pages 65-69 for the complete list of RS232 commands. 41 English - Optoma W351 | Manual - Page 42
. Password default value is "1234" (first time). Security On: Choose "On" to use security verification when turning on the projector. Off: Choose "Off" to be able to switch on the projector without password verification. Security Timer Use this function to set how long (Month/Day/Hour) the - Optoma W351 | Manual - Page 43
User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support. 43 English - Optoma W351 | Manual - Page 44
Press the to decrease the volume. Press the to increase the volume. Audio Input The default audio inputs are on the back panel of the projector. Use this option to reassign any of the Audio Inputs to the current image source. Default: VGA1/VGA2. Audio1: Video/S-Video. Audio2: HDMI. English - Optoma W351 | Manual - Page 45
network function. (Read- Only mode) DHCP If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use ▲ or ▼ to select the number of IP - Optoma W351 | Manual - Page 46
User Controls DNS Check the DNS Server IP address with your network/system administrator if you wish to configure it manually. Default value is 192.168.0.51. Apply Choose "Yes" to save the changes made in network configuration settings. MAC Address Display MAC addresss for the projector. English 46 - Optoma W351 | Manual - Page 47
Logo Press to capture an image of the picture currently displayed on screen. If changes are made they will take effect the next time the projector is powered on. Default: The default startup screen. Neutral: Logo is not displayed on startup screen. Closed Captioning Use this function to set the - Optoma W351 | Manual - Page 48
Choose "Off" to show the "searching" message. Keypad Lock When the keypad lock function is "On", the control panel will be locked however, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the control panel. Test Pattern Display a test pattern. There - Optoma W351 | Manual - Page 49
setting from "On" to "Off", it will display a warning message: T op: Choose "Top", the projector will receive IR signal from remote control through the top sensor. F ront: Choose "Front", the projector will receive IR signal from remote control through the front sensor. Background Color Use - Optoma W351 | Manual - Page 50
User Controls OPTIONS | Remote Settings The function of User 1/2/3 keys on the remote control can be selfdefined. You can choose a desired function for these keys separately in this option. User 1 The available options for User1 key are VGA2/S-Video/LAN/Brightness/Contrast/Sleep Timer. User 2 The - Optoma W351 | Manual - Page 51
Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min) Sets the countdown timer interval. The countdown timer - Optoma W351 | Manual - Page 52
. Brightness Mode BRIGHT: Choose "BRIGHT" to increase the brightness. Eco.: Choose "Eco." to dim the projector lamp which will lower power consumption and extend the lamp life. `` Dynamic: Choose "Dynamic" to dim the lamp power which will be based on brightness level of the content and adjust - Optoma W351 | Manual - Page 53
of use. Select "No" to turn off warning message. The default setting for Filter is "No". After assembling filter, please turn on the projector then press "Menu", go to "OPTIONS -> Optional Filter Settings -> Optional Filter Installed" and select "Yes". Filter Usage Hours Display the filter time - Optoma W351 | Manual - Page 54
Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service Check if the projection lamp has been securely installed. Please refer to the "Replacing the lamp" section. Ensure that - Optoma W351 | Manual - Page 55
keys listed below for your notebook manufacturer to send signal out from notebook to projector. Example: [Fn]+[F4] Acer [Fn]+[F5] Asus [Fn]+[F8 Each has a different way to be reactivated. Refer to your computer's manual for detailed information. Image is unstable or flickering Use "Phase" - Optoma W351 | Manual - Page 56
your DVD player. Use of Keystone is not recommended. Image is too small or too large Adjust the Zoom Ring on the top of the projector. Move the projector closer to or further from the screen. Press "Menu" button on the remote control, go to "Display Format" and try the different settings - Optoma W351 | Manual - Page 57
button and switch to "SBS". Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the - Optoma W351 | Manual - Page 58
Standby State (Input power cord) Power on (Warming) ON/STANDBY LED (Blue/Red) Red Flashing Blue Lamp lighting Blue Power off (Cooling) Error (Over Temp.) Steady light No light Error (Fan fail) Error (Lamp fail) Flashing Blue Flashing Red Flashing Red Flashing Red Temp-LED (Red - Optoma W351 | Manual - Page 59
Messages Temperature warning: Fan failed: Lamp warning: Out of display range: If the remote control does not work Check the operating angle of the remote control is within ±20° both horizontally and vertically of one of the IR receivers on the projector. Make sure there are not any - Optoma W351 | Manual - Page 60
message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. English 60 Warning: If ceiling mounted, please use caution when opening - Optoma W351 | Manual - Page 61
. 4 8. Unscrew the one screw on the lamp module. 5 9. Lift up the lamp handle 6 and remove the lamp module slowly and carefully. 7 To replace the lamp module, reverse the previous steps. 10. Turn on the projector and reset the lamp timer. Lamp Reset: (i) Press "Menu" (ii) Select "OPTIONS" (iii - Optoma W351 | Manual - Page 62
/replace filters every three months or sooner depending upon the environment by following the steps below. 1. Switch off the power to the projector by pressing the " " button. 2. Disconnect the power cord. 3. Remove the filter slowly and carefully. 4. Clean or replace the filter. 5. To install the - Optoma W351 | Manual - Page 63
RB (reduced blanking). ™™ (*2) 3D timing for True 3D projector. ™™ (*3) is not supported HDMI input signal for Mac. ™™ (*4) Proscene and Data Projector > 4,000 Lumens only, Native resolution must support. ™™ (*5) Window 8 standard timing. ™™ 120Hz input signals may be dependent on graphics cards - Optoma W351 | Manual - Page 64
Appendices Signal Resolution Refresh Rate (Hz) Video Analog HDMI Mac UXGA 1600 x1200 60 - O O - 1920 x 1080 24 O O O - 1920 x 1080 30 HDTV (1080p) 1920 x 1080 50 - - O - O O O - 1920 x 1080 60 O O O O 1920 x 1080 50 HDTV (1080i) 1920 x 1080 60 O - O - - Optoma W351 | Manual - Page 65
RS232 Commands and Protocol Function List RS232 Pin Assignments 3 2 1 Pin no. Name 1 The interface is 2 subject to model's 3 specifications. TXD RXD GND I/O (From Projector Side) OUT IN GND 9876 54321 Pin no. 1 2 3 4 5 6 7 8 9 Spec. N/A RXD TXD N/A GND N/A N/A N/A N/A 65 English - Optoma W351 | Manual - Page 66
ASCII code FUclAoowRdTCe1o6n.5t5ro0l : None FIFO: Disable Projector Return (Pass): P Projector Return (Pass): P Projector Return (Fail): F Projector Return (Fail): F XX=01-99, projector's ID, XX=00 is for all projectors SEND to projector 232 ASCII Code HEX Code Function Description - Optoma W351 | Manual - Page 67
20 30 0D 3D Mode OFF ~XX230 1 7E 30 30 32 33 30 20 31 0D 3D Mode DLP-Link ~XX400 0 7E 30 30 34 30 30 20 30 0D 3Dɦ2D 3 D ~XX400 1 30 30 30 30) ~9999 (a=7E 39 39 39 39) ~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39) ~XX80 1 7E 30 30 38 30 20 31 0D - Optoma W351 | Manual - Page 68
37 0D Source SEND from projector automatically 232 ASCII Code HEX Code Function Projector Return Description When Standby/Warming/ INFOn Standby/Warming/Cooling/Out of Range/Lamp fail/Fan Cooling/Out of Range/Lamp Lock/Over Temperature/Lamp Hours Running Out/Cover Open fail - Optoma W351 | Manual - Page 69
232 ASCII Code HEX Code Function Projector Return Description ~XX121 1 7E 30 30 31 32 31 20 31 0D XX150 1 7E 30 30 31 35 30 20 31 0D Information OKabbbbccdddde a : 0/1 = Off/On bbbb: Lamp Hour cc: source 00/01/02/03/04/05/= None/VGA1/VGA2/Video/S-Video/HDMI dddd: FW version e - Optoma W351 | Manual - Page 70
Appendices Ceiling Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M4*3 Minimum - Optoma W351 | Manual - Page 71
Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] Canada 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Latin America 3178 Laurelview Ct. Fremont - Optoma W351 | Manual - Page 72
12F., No. 213, Sec. 3, Beixin Rd., +886-2-8911-8600 Xindian Dist., New Taipei City 231, +886-2-8911-6550 Taiwan, R.O.C. [email protected] www.optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong +852-2396-8968 +852 - Optoma W351 | Manual - Page 73
& Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no - Optoma W351 | Manual - Page 74
2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
5
Product Features
................................
5
Introduction
......................................
6
Package Overview
..............................
6
Product Overview
...............................
7
Main Unit
..............................................
7
Control Panel
.......................................
8
Input/Output Connections
....................
9
Remote Control
..................................
10
Installation
.....................................
11
Connecting the Projector
..................
11
Connect to Computer/Notebook
........
11
Connect to Video Sources
.................
12
Powering the Projector On / Off
........
13
Powering On the Projector
.................
13
Powering off the projector
..................
14
Warning Indicator
...............................
14
Adjusting the Projected Image
..........
15
Adjusting the Projector’s Height
........
15
Adjusting the Projector’s Zoom /
Focus
.................................................
16
Adjusting Projection Image Size
........
17
User Controls
................................
20
Control Panel & Remote Control
......
20
Control Panel
.....................................
20
Remote Control
..................................
21
On-screen Display Menus
................
28
How to operate
..................................
28
Menu Tree
..........................................
29
IMAGE
...............................................
31
IMAGE | Advanced
............................
33
IMAGE | Advanced | Signal (RGB) ... 35
DISPLAY
............................................
36
DISPLAY | 3D
...................................
39
SETUP
...............................................
40
SETUP | Security
...............................
42
SETUP | Audio Settings
.....................
44
SETUP | LAN Settings
.......................
45
SETUP | Advanced
............................
47
OPTIONS
...........................................
48
OPTIONS | Remote Settings
.............
50
OPTIONS | Advanced
........................
51
OPTIONS | Lamp Settings
.................
52
OPTIONS | Optional Filter Settings ... 53
Appendices
....................................
54
Troubleshooting
................................
54
Replacing the Lamp
..........................
60
Installing and Cleaning the Filter
......
62
Compatibility Modes
.........................
63
Computer/Video/HDMI/Mac
Compatibility
......................................
63
3D Input Video Compatibility
.............
64
RS232 Commands and Protocol
Function List
.....................................
65
RS232 Pin Assignments
....................
65
RS232 Protocol Function List
............
66
Ceiling Mount Installation
..................
70
Optoma Global Offices
.....................
71
Regulation & Safety Notices
.............
73
Table of Contents