Optoma W351 Manual - Page 61
Lamp Replacement Procedure, button., ii Select OPTIONS, iii Select, v Select Yes.
View all Optoma W351 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
The screws on the lamp cover and the lamp cannot be removed. The projector cannot be turned on if the lamp cover has not been 6 placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the lamp module if it was accidentally 1 touched. Appendices 2 5 3 4 7 Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the " " button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the one screw on the cover. 1 5. Lift up and remove the cover. 2 6. Lift up the lamp handle. 3 7. Press on the both sides then lift up and remove the lamp cord. 4 8. Unscrew the one screw on the lamp module. 5 9. Lift up the lamp handle 6 and remove the lamp module slowly and carefully. 7 To replace the lamp module, reverse the previous steps. 10. Turn on the projector and reset the lamp timer. Lamp Reset: (i) Press "Menu" (ii) Select "OPTIONS" (iii) Select "Lamp Settings" (iv) Select "Lamp Reset" (v) Select "Yes". 61 English