Optoma X318ST W318ST User Manual

Optoma X318ST Manual

Get Optoma X318ST PDF manuals and user guides View all Optoma X318ST manuals
Add to My Manuals
Save this manual to your list of manuals

Optoma X318ST manual content summary:

  • Optoma X318ST | W318ST User Manual - Page 1
    DLP® Projector User manual
  • Optoma X318ST | W318ST User Manual - Page 2
    TABLE OF CONTENTS SAFETY 4 Important Safety Instruction...4 3D Safety Information...5 Copyright...6 Disclaimer...6 Trademark Recognition the projector...15 Connecting sources to the projector 17 Adjusting the projector image...20 USING THE PROJECTOR 23 Powering on / off the projector 23
  • Optoma X318ST | W318ST User Manual - Page 3
    pattern menu...46 Setup remote settings menu...46 Setup projector ID menu...46 Setup options menu...46 Setup Projector dimensions and ceiling mount installation 63 IR remote control 1 codes...64 IR remote control 2 codes...66 Troubleshooting...68 Warning indicators...70 Specifications...72 Optoma
  • Optoma X318ST | W318ST User Manual - Page 4
    servicing) instructions in the literature accompanying the appliance. Please follow all warnings, precautions and maintenance as recommended in this user's guide. Important Safety Instruction fire and/or electric shock, do not expose the projector to rain or moisture. Do not install near heat
  • Optoma X318ST | W318ST User Manual - Page 5
    service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. ‡‡ See projector the unit to cool down. Follow instructions as described on pages 56-57. ‡‡ This projector will detect the life of the
  • Optoma X318ST | W318ST User Manual - Page 6
    users your 3D PROJECTOR near DLP logo are registered trademarks of Texas Instruments and BrilliantColorTM is a trademark of Texas Instruments. MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing, LLC. All other product names used in this manual
  • Optoma X318ST | W318ST User Manual - Page 7
    could void the user's authority, which is granted by the Federal Communications Commission, to operate this projector. Operation Conditions This & TTE Directive 1999/5/EC (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding. To
  • Optoma X318ST | W318ST User Manual - Page 8
    supplied in some specific regions. Please consult your dealer for detailed information. Standard accessories  CD User Manual *(1)  Warranty Card *(2)  Basic User Manual Projector Remote control *(3) Power lead Documentation Note The remote control is shipped with the battery. *(1) For
  • Optoma X318ST | W318ST User Manual - Page 9
    INTRODUCTION Product Overview 6 5 4 7 12 1 2 3 8 9 11 10 4 Note: Keep a minimum distance of 20 cm between the "inlet" and "outlet" labels. No Item 1. IR Receiver 2. Keypad 3. Lens Cap 4. Tilt-Adjustment Foot 5. Lens 6. Focus Lever No Item 7. Ventilation (inlet) 8. Lamp Cover 9.
  • Optoma X318ST | W318ST User Manual - Page 10
    INTRODUCTION Connections Type 1 (8 IO) 1 2 3 45 5 Full 3D Type 2 (12 IO) 10 9 8 7 6 1 11 2 3 12 4 65 HDMI HDMI 2 MHL USB POWER OUT (5V 1.5A) VGA IN 1 VGA OUT VGA IN 2 RS232 RJ-45 VIDEO AUDIO OUT AUDIO IN MIC IN Full 3D 10 7 8 9 14 13 10 English
  • Optoma X318ST | W318ST User Manual - Page 11
    1 Connector 2. USB Power Out (5V/1.5A) Connector / MOUSE / SERVICE Connector 3. VGA IN / VGA IN 1 Connector 4. Video Connector 5. Connector Type 1 (8 IO) √ √ N/A N/A N/A N/A Note: "√" means the item is supported, "N/A" means the item is not available. Type 2 (12 IO) √ √ Note: ‡‡ ‡‡
  • Optoma X318ST | W318ST User Manual - Page 12
    INTRODUCTION Keypad 1 2 3 9 12 4 11 5 6 10 No Item 1. On/Standby LED 2. Lamp LED 3. Temp LED 4. Information 5. Re-Sync 6. Four Directional Select Keys 98 7 No Item 7. IR Receiver 8. Enter 9. Keystone Correction 10. Menu 11. Source 12 Power 12 English
  • Optoma X318ST | W318ST User Manual - Page 13
    18. Brightness Mode The actual remote control may vary depending on the region. Some keys may have no function for models that do not support these features. Before using the remote control for the first time, remove the transparent insulation tape. See page 21 for battery installation. CR2302V5OL
  • Optoma X318ST | W318ST User Manual - Page 14
    - 8. Keystone - / + 9. Menu 10. Aspect Ratio 11. HDMI 12. User 2 13. User 1 14. Source No Item 15. Brightness Mode 16. Mouse On / Off 17 - / + 22. 3D Menu On / Off 23. VGA 24. Video 25. User 3 26. Numeric Keypad (0-9) 27. Resync The actual remote control may vary depending on
  • Optoma X318ST | W318ST User Manual - Page 15
    mount. The projector should be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector lamp or the projector itself. For none standard installation advise please contact Optoma. English 15
  • Optoma X318ST | W318ST User Manual - Page 16
    is running, and the air intake and exhaust vents are unobstructed. All enclosures should pass a certified thermal evaluation to ensure that the projector does not recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is with the acceptable operation
  • Optoma X318ST | W318ST User Manual - Page 17
    SETUP AND INSTALLATION Connecting sources to the projector Type 1 (8 IO) 4 1 3 2  5 6 7 Full 3D MOLEX 12 11 10 9 8 MOLEX English 17
  • Optoma X318ST | W318ST User Manual - Page 18
    SETUP AND INSTALLATION Type 2 (12 IO) 13 4 1 5 6 7 HDMI HDMI 2 MHL USB POWER OUT (5V 1.5A) VGA IN 1 2 VGA OUT VGA IN 2 RS232 RJ-45 VIDEO AUDIO OUT AUDIO IN MIC IN Full 3D MOLEX 3 9 10 14 12 8 11 15 MOLEX 18 English
  • Optoma X318ST | W318ST User Manual - Page 19
    Cable 11. USB Cable 12. Power Cord 13. MHL Cable 14. Microphone In Cable 15. RJ-45 Cable Type 1 (8 IO N/A N/A N/A Note: "√" means the item is supported, "N/A" means the item is not available. Type 2 (12 IO English 19
  • Optoma X318ST | W318ST User Manual - Page 20
    the image height. 1. Locate the adjustable foot you wish to adjust on the underside of the projector. 2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. Tilt-Adjustment Feet Tilt-Adjustment Ring Focus To adjust the focus, turn the focus lever clockwise or
  • Optoma X318ST | W318ST User Manual - Page 21
    case clean and install new battery. ‡‡ Risk of an explosion if battery is replaced by an incorrect type. ‡‡ Dispose of used battery according to the instructions. English 21
  • Optoma X318ST | W318ST User Manual - Page 22
    should not be longer than 8 meters (~ 26 feet). ‡‡ Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. ‡‡ Make sure the IR transmitter of the remote control is not being shined by sunlight or fluorescent lamps
  • Optoma X318ST | W318ST User Manual - Page 23
    again. 3. Press the " " again to confirm, otherwise the message will disappear after 15 seconds. When you press the " " button for the second time, the projector will shut down. 4. The cooling fans will continue to operate for about 10 seconds for the cooling cycle and the On/ Standby LED will flash
  • Optoma X318ST | W318ST User Manual - Page 24
    source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, push the source button on the projector keypad or the remote control to select the desired input. or 24 English
  • Optoma X318ST | W318ST User Manual - Page 25
    settings. The projector will automatically detect the source. 1. To open the OSD menu, press on the remote control or the projector keyboard. 2. To exit, press the or again. The OSD menu will close and the projector will automatically save the new settings. Type 1 (8 IO) Sub Menu Settings
  • Optoma X318ST | W318ST User Manual - Page 26
    USING THE PROJECTOR Type 2 (12 IO) Main Menu Sub Menu Display Image Settings 3D Aspect Ratio Edge Mask Zoom Image Shift Keystone Select Exit Navigation guide Settings Enter 26 English
  • Optoma X318ST | W318ST User Manual - Page 27
    USING THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Temperature Color Settings Color Matching Color Hue Saturation Gain Values Presentation Bright Cinema Game sRGB DICOM SIM. User 3D Off [Default] Blackboard Light Yellow Light Green Light Blue Pink Gray -50~50 -50~
  • Optoma X318ST | W318ST User Manual - Page 28
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Color Matching RGB Gain/Bias 0~31 (depends on signal) [Default: 0] -5~5 (depends on signal) [Default: 0] -5~5 (depends on signal) [Default: 0] Bright Eco. Dynamic Eco+ Off [Default] DLP-Link 3D [Default] L R 28 English
  • Optoma X318ST | W318ST User Manual - Page 29
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 3D Format 3D 3D Sync Invert Display Aspect Ratio Edge Mask Zoom H Image shift V Keystone Mute Audio
  • Optoma X318ST | W318ST User Manual - Page 30
    USING THE PROJECTOR Main Menu Sub Menu Filter Settings Sub Menu 2 Filter Reset Sub Menu 3 Direct Power On Signal Power On Auto Power Off (min) Sleep Timer (min)
  • Optoma X318ST | W318ST User Manual - Page 31
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 IR Function Sub Menu 3 User1 [depends on model] [(*) for Type 2 (12 IO) only] Setup Remote Settings [depends on remote]
  • Optoma X318ST | W318ST User Manual - Page 32
    Main Menu Sub Menu Remote Settings [depends on remote] Projector ID Sub Menu 2 User3 [depends on model] [(*) for Type 2 (12 IO) only] Sub Menu 3 Setup Language Options Closed Captioning Menu Settings Menu Location Sub Menu 4
  • Optoma X318ST | W318ST User Manual - Page 33
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Menu Settings Menu Timer Auto Source Input Source [(*) for Type 2 (12 IO) only] Setup Options HDMI or
  • Optoma X318ST | W318ST User Manual - Page 34
    Power mode (Standby) Bright Eco. Info Lamp Hours Dynamic Eco+ Total Network Status (Type 2 (12 IO) only) IP Address (Type 2 (12 IO) only) Projector ID Filter Usage Hours 34 English Sub Menu 4 Values (read only) (read only) Off [Default] On 192.168.0.100 [Default] 255.255.255.0 [Default
  • Optoma X318ST | W318ST User Manual - Page 35
    USING THE PROJECTOR Main Menu Info Sub Menu Brightness Mode FW Version Sub Menu 2 System LAN (Type 2 (12 IO) only) MCU Sub Menu 3 Sub Menu 4 Note: The available menu options vary depending on the model type. Values English 35
  • Optoma X318ST | W318ST User Manual - Page 36
    : This mode is suitable for showing PowerPoint presentations when the projector is connected to the PC. ‡‡ Bright: Maximum brightness from monochrome medical image such as an X ray radiography, MRI, etc. ‡‡ User: Memorize user's settings. ‡‡ 3D: To experience the 3D effect, you need to have
  • Optoma X318ST | W318ST User Manual - Page 37
    USING THE PROJECTOR Color Settings Configure the color settings. ‡‡ BrilliantColorTM: This type from the following: Auto, RGB(0-255), RGB(16-235), and YUV. ‡‡ White Level: Allow user to adjust White Level when inputting Video signals. Note: White level can only be adjusted for Video input
  • Optoma X318ST | W318ST User Manual - Page 38
    lamp-based projectors. ‡‡ Bright: Choose "Bright" to increase the brightness. ‡‡ Eco.: Choose "Eco." to dim the projector lamp which will . ‡‡ Off: Select "Off" to turn off 3D mode. ‡‡ DLP-Link: Select to use optimized settings for DLP 3D Glasses. 3D → 2D Use this option to specify how the
  • Optoma X318ST | W318ST User Manual - Page 39
    PROJECTOR display format. WXGA scaling table (screen type 16:10): Note: ‡‡ Supported screen type 16:9 (1280x720), 16:10 (1280x800). ‡‡ When screen screen type is 16:10 there is no 16x9 format in this condition. ‡‡ If user change to auto, will auto change the display mode at same time. 16 :
  • Optoma X318ST | W318ST User Manual - Page 40
    USING THE PROJECTOR WXGA auto mapping rule (screen type 16:10): Auto 4:3 Wide Laptop SDTV HDTV Input resolution H-resolution V-resolution 640 480 800 600 1024 768 1280 1024
  • Optoma X318ST | W318ST User Manual - Page 41
    USING THE PROJECTOR Auto HDTV Input resolution H-resolution V-resolution 1280 720 1920 1080 Auto/Scale 1280 720 1280 720 1280 720 XGA scaling table: Source 4x3 16x9 Native
  • Optoma X318ST | W318ST User Manual - Page 42
    Display keystone menu Keystone Adjust the image distortion caused by tilting the projector. Audio menu Audio mute menu Mute Use this option to temporarily turn off the sound. ‡‡ ‡‡ Note: ‡‡ ‡‡ On: Choose "On" to turn mute on. Off: Choose "
  • Optoma X318ST | W318ST User Manual - Page 43
    or on the remote control. Signal Power On Choose "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected, without pressing the "Power" key on the projector Keypad or on the remote control. Note: ‡‡ ‡‡ If the "Signal Power On" option is turned "On
  • Optoma X318ST | W318ST User Manual - Page 44
    powered on again, if selected within a period of 100 seconds. ‡‡ Off: The fan will start cooling the system after 10 seconds when user turns off the projector. Power Mode (Standby) Set the power mode setting. ‡‡ Active: Choose "Active" to return to normal standby (LAN on, VGA OUT off). ‡‡ Eco
  • Optoma X318ST | W318ST User Manual - Page 45
    in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system. HDMI Amplifier HDMI DVD Player ". Inclusive of TV Set to "Yes" if you prefer both TV and projector to be automatically turned off at the same time. To prevent both devices
  • Optoma X318ST | W318ST User Manual - Page 46
    MHL. Note: The available menu options vary depending on the model type. Setup projector ID menu Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command. Setup options menu Language Select the multilingual OSD menu between
  • Optoma X318ST | W318ST User Manual - Page 47
    "Off" to lock or unlock adjusting display mode settings. Keypad Lock When the keypad lock function is "On", the Keypad will be locked. However, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the Keypad. Information Hide Enable this function to hide
  • Optoma X318ST | W318ST User Manual - Page 48
    IP address. Open the web browser in your PC and type in the projector's IP address ("Network > LAN > IP Address"). Enter the user name and password, and click "Login". The projector's configuration web interface opens. The default user name and password is "admin". The steps in this section is based
  • Optoma X318ST | W318ST User Manual - Page 49
    > LAN"). 3. Open Network and Sharing Center page on your PC, and assign the identical network parameters to your PC as set on projector. Click "OK" to save the parameters. 4. Open the web browser on your PC and type in to the URL field the IP address, assigned in
  • Optoma X318ST | W318ST User Manual - Page 50
    /english/ For more detailed information about the various types of external devices which can be connected to the LAN / RJ45 port and remote control the projector, as well as the supported commands for these external devices, please contact the Support-Service directly. 50 English
  • Optoma X318ST | W318ST User Manual - Page 51
    RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). HDMI HDMI 2 MHL USB POWER OUT (5V 1.5A) VGA IN 1 VGA OUT VGA IN 2 RS232 RJ-45 VIDEO AUDIO OUT AUDIO
  • Optoma X318ST | W318ST User Manual - Page 52
    5. Click "Properties". 6. Type in the IP address and Subnet mask, then press "OK". 7. Press the "Menu" button on the projector. 8. Open on projector Network > LAN. 9. Enter the following connection parameters: ±± DHCP: Off ±± IP Address: 192.168.0.100 ±± Subnet Mask: 255.255.255.0 ±± Gateway
  • Optoma X318ST | W318ST User Manual - Page 53
    USING THE PROJECTOR The projector is setup for remote management. The LAN / RJ45 function displays as follows: Information page Main page Tool page Contact IT helpdesk English 53
  • Optoma X318ST | W318ST User Manual - Page 54
    projector so called "RS232 by TELNET" for LAN / RJ45 interface. Quick Start-Guide for "RS232 by Telnet" ‡‡ Check and get the IP address on OSD of the projector ±± (ttt.xxx.yyy.zzz: IP-Address of the projector) 3. If Telnet-Connection ready, and user can have RS232 command input, then "Enter" key
  • Optoma X318ST | W318ST User Manual - Page 55
    Regulatory ‡‡ Serial Number ‡‡ Source ‡‡ Resolution ‡‡ Refresh Rate ‡‡ Display Mode ‡‡ Power Mode (Standby) ‡‡ Lamp Hours ‡‡ Network Status (*) ‡‡ IP Address (*) ‡‡ Projector ID ‡‡ Filter Usage Hours ‡‡ Brightness Mode ‡‡ FW Version Note: (*) The "Network Status" and "IP Address" options are only
  • Optoma X318ST | W318ST User Manual - Page 56
    screen. Warning Lamp Warning Lamp life exceeded. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: If ceiling mounted, please
  • Optoma X318ST | W318ST User Manual - Page 57
    Remove the lamp cord. 5 9. Remove the lamp module carefully. 6 10. To replace the lamp module, reverse the previous steps. 11. Turn on the projector and reset the lamp timer. 12. Lamp Reset: (i) Press "Menu"  (ii) Select "Setup"  (iii) Select "Lamp Settings"  (iv) Select "Lamp Reset"  (v) Select
  • Optoma X318ST | W318ST User Manual - Page 58
    is used in a dusty environment. Lamp replacing Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Disconnect the power cord. 3. Remove the dust filter carefully. 1 4. Clean or replace the dust filter. 2 5. To install
  • Optoma X318ST | W318ST User Manual - Page 59
    ADDITIONAL INFORMATION Compatible resolutions Digital compatibility B0/Established Timing 720x400 @ 70Hz 640x480 @ 60Hz 640x480 @ 67Hz 640x480 @ 72Hz 640x480 @ 75Hz 800x600 @ 56Hz 800x600 @ 60Hz 800x600 @ 72Hz 800x600 @ 75Hz 832x624 @ 75Hz 1024x768 @ 60Hz 1024x768 @ 70Hz 1024x768 @ 75Hz 1280x1024
  • Optoma X318ST | W318ST User Manual - Page 60
    is Frame sequential Note: ‡‡ If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode. ‡‡ Support NVIDIA 3DTV Play if there is no patent fee from Optoma. 1080i@25hz and 720p@50hz will run in 100 hz; other 3D timing will run in 120hz. ‡‡ 1080p@24hz will
  • Optoma X318ST | W318ST User Manual - Page 61
    ADDITIONAL INFORMATION Image size and projection distance XGA Diagonal m inch 0.81 32 1.27 50 1.52 60 1.78 70 2.03 80 2.29 90 2.54 100 3.05 120 3.81 150 4.57 180 5.08 200 6.35 250 7.62 300 Desired Image Size Width m inch 0.65 25.60 1.02 40.00 1.22 48.00 1.42
  • Optoma X318ST | W318ST User Manual - Page 62
    ADDITIONAL INFORMATION W H H Hd 5.2 cm D 62 English
  • Optoma X318ST | W318ST User Manual - Page 63
    and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: ‡‡ Screw type: M4*3 ‡‡ Minimum screw
  • Optoma X318ST | W318ST User Manual - Page 64
    USB mouse via USB) C9 Press to display or exit the on-screen display menus for projector. 88 ‡‡ Press to adjust image distortion caused by tilting the projector. C7 ‡‡ Press to navigate down. Press to manually select a 3D mode that matches your 3D content. 93 Press to choose HDMI source. 86
  • Optoma X318ST | W318ST User Manual - Page 65
    choose video source. Press to select an input signal. Press to automatically adjust the picture brightness to give an optimum contrast performance. Automatically synchronize the projector to the input source. Key code 8E CE C3 87 C4 English 65
  • Optoma X318ST | W318ST User Manual - Page 66
    -key definition Description Power on/off Press to turn on / off the projector. Switch Press to switch the USB mouse on / off. Freeze Press to / unhide the screen picture and turn off / on audio. Press to freeze the projector image. Press to momentarily turn off / on the audio. L R Up arrow
  • Optoma X318ST | W318ST User Manual - Page 67
    exit the on-screen display menus Menu/2 for projector. ‡‡ Use as numeric keypad number "2". 3D/3 ‡‡ Press to manually select a 3D mode that matches your 3D as numeric keypad number "6". User 1/7 ‡‡ User defined keys. Please see page 46 to setup. User 2/8 ‡‡ User 3/9 Use as numeric keypad
  • Optoma X318ST | W318ST User Manual - Page 68
    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems N o image appears on-screen ‡‡ Ensure all the cables and power connections
  • Optoma X318ST | W318ST User Manual - Page 69
    signal is HDMI 1.3 2D (1080i side-by-side half), press "3D" button and switch to "SBS". Other problems T he projector stops responding to all controls ‡‡ If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. L amp burns out or
  • Optoma X318ST | W318ST User Manual - Page 70
    red and if "On/Standby" indicator flashes red. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or flash, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord) Power on
  • Optoma X318ST | W318ST User Manual - Page 71
    the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. ‡‡ Fan failed: Warning FAN LOCKED The projector will switch off automatically Please contact a service center for repair. ‡‡ Out of display range: HDMI Out
  • Optoma X318ST | W318ST User Manual - Page 72
    Manual type A for mouse / service ‡‡ RJ-45 (support web control)* Note: (*) This connector is only applicable for Type 2 (12 I/O) model. 1073.4 Million color ‡‡ Horizontal scan rate: 15.375 ~ 91.146 KHz ‡‡ Vertical scan rate: 50 ~ 85 Hz (120Hz for 3D feature projector
  • Optoma X318ST | W318ST User Manual - Page 73
    ADDITIONAL INFORMATION Optoma global offices For service or support, please contact your local office. USA 47697 Westinghouse Drive, Fremont, CA 94539, USA www.optomausa.com Japan 888-289-6786 510-897-8601 [email protected] 3-25-18 0120-380-495 [email protected] www.os-worldwide.com
  • Optoma X318ST | W318ST User Manual - Page 74
    www.optoma.com *36.7DR01G001-A* P/N:36.7DR01G001-A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
User manual
DLP
®
Projector